Lantronix EMG 8500 EMG User Guide - Page 227

10: Device Ports Escape Sequence The escape character used to get the attention of the SSH or Telnet client. It is optional, and if not specified, Telnet and SSH use their default escape character. For Telnet, the escape character is either a single character or a two-character sequence consisting of '^' followed by one character. If the second character is '?', the DEL character is selected. Otherwise, the second character is converted to a control character and used as the escape character. For SSH, the escape character is a single character. 4. You have the following options: - To add a host to the host list, click the right arrow. The host displays in the Hosts box. - To remove a host from the host list, select the host in the Hosts box and click the left arrow. - To give the host a higher precedence, select the host in the Hosts box and click the up arrow. - To give the host a lower precedence, select the host in the Hosts box and click the down arrow. 5. Click the Edit Host List button. After the process completes, a confirmation message is displayed on the page. To delete a host list: 1. Select the host list in the Host Lists table. 2. Click the Delete Host List button. After the process completes, a confirmation message is displayed on the page. Host List Commands Go to Host List Commands to view CLI commands which correspond to the web page entries described above. EMG™ Edge Management Gateway User Guide 227