Lantronix EMG 8500 EMG User Guide - Page 71

For a list of commands, type 'help'. [emgfcf0]> 5: Quick Setup Next Step After completing quick setup on the EMG, you may want to configure other settings. You can use the web page or the command line interface for configuration.  For information about the web and the command line interfaces, go to Chapter 6: Web and Command Line Interfaces.  To continue configuring the EMG unit, go to Chapter 7: Networking. Limiting Sysadmin User Access For security purposes, full administrative access to the EMG via the default sysadmin local user account can be limited to only the front console port of the EMG device. These steps will prevent any local users from logging in, restrict the default sysadmin local user to the front console port, and allow a user with administrative rights to login, as long as remote authentication is working. To configure limited sysadmin user access: 1. Enable the Sysadmin access limited to Console Port option on the Local/Remote Users web page. 2. Enable a remote authentication method (such as TACACS+ or LDAP) and configure the remote authentication method to be first in the order of methods used. 3. Create a remote user account with full administrative rights. 4. Clear the Attempt next method on authentication rejection checkbox on the Authentication Methods web page. EMG™ Edge Management Gateway User Guide 71