Lantronix EMG 8500 EMG User Guide - Page 359

15: Maintenance Events On this Maintenance > Events page, you can define what action you want to take for events that may occur in the EMG unit. 1. Click the Maintenance tab and select the Events option. The following page displays: Figure 15-13 Maintenance > Events 2. Enter the following: Event Trigger Host to Ping RPM From the drop-down list, select the type of incident that triggers an event. Currently, the options are:  Receive Trap  Temperature Over/Under Limit (for Sensorsoft devices)  Humidity Over/Under Limit (for Sensorsoft devices)  Device Port Data Drop  No Internal Modem Dial Tone  Ping Host Fails  RPM Load Over Threshold  DIO Port State Change  DIO Port State Abnormal When the trigger is set to Ping Host Fails, enter the hostname, IPv4 address or IPv6 address of the host to ping. The host will be pinged every 2 minutes. When the trigger is set to RPM Load over Threshold, select the RPM that will be monitored for a current that exceeds a defined threshold. The RPM needs to support providing a current level as part of its status information. The RPM current will be checked every 2 minutes. EMG™ Edge Management Gateway User Guide 359