Lantronix EMG 8500 EMG User Guide - Page 145

7: Networking Positive Min/Avg/Max: 0/0/0 msec Positive Number Of/Sum of All/Sum of All Squared: 0/0/0 msec Negative Min/Avg/Max: 0/0/0 msec Negative Number Of/Sum of All/Sum of All Squared: 0/0/0 msec Number of Successes: 10 Number of Errors: 0 Lost Packet: 0 (0%) Out of Sequence: 0 Late Arrival: 0 Miscellaneous Error: 0 Table 7-17 Error Conditions Detected by Probes The following error conditions are detected by the probes. Except where noted, the RTT results for a packet with errors will not be counted in the accumulated statistics. Error Condition Description Timeout A response was never received for the packet. These packets are listed as Lost Packets under the accumulated statistics. Late Arrival A response was received for a packet, but the response was received after the timeout configured for the probe. The EMG will wait at most 2 times the probe's timeout for late arrival packets. The RTT results will be included in the accumulated statistics. Not Connected A packet could not be sent because the connection to the destination host could not be established, or because the attempt to send the packet failed. Sequence Error A packet response was received with an unexpected sequence number. Possible reasons are: a duplicate packet was received, a response was received after it timed out, a corrupted packet was received and was not detected. Verify Data Error A response was received for a packet with payload data that does not match the expected data. DNS Server Timeout A DNS lookup could not be completed because the EMG could not connect to the DNS name server. DNS Lookup Error A DNS lookup failed - the requested hostname could not be resolved. This is not considered a protocol error, but rather an expected result, depending on the hostname being resolved. The RTT results will be included in the accumulated statistics. TCP Connect Timeout A TCP connect could not be completed because a connection to the TCP server could not be established. HTTP Transaction Timeout An HTTP Get that failed because no response was received from the HTTP server before the timeout expired. HTTP Error An HTTP Get succeeded, but the HTTP content (base page) that was downloaded had errors: missing "HTTP/" header string, missing "Connection: close" string, or response has an HTTP error code (the code was not 200/OK). This is not considered a protocol error. The RTT results will be included in the accumulated statistics. Generic Error Any error that does fall into any of the above error conditions. EMG™ Edge Management Gateway User Guide 145