Lantronix EMG 8500 EMG User Guide - Page 324

14: User Authentication Escape Sequence Break Sequence Custom Menu Display Menu at Login A single character or a two-character sequence that causes the EMG to leave direct (interactive) mode. (To leave listen mode, press any key.) A suggested value is Esc+A (escape key, then uppercase "A" performed quickly but not simultaneously). You would specify this value as \x1bA, which is hexadecimal (\x) character 27 (1B) followed by an A. This setting allows the user to terminate the connect direct command on the command line interface when the endpoint of the command is deviceport, tcp, or udp. A series of one to ten characters users can enter on the command line interface to send a break signal to the external device. A suggested value is Esc+B (escape key, then uppercase "B" performed quickly but not simultaneously). You would specify this value as \x1bB, which is hexadecimal (\x) character 27 (1B) followed by a B. If custom menus have been created you can assign a default custom menu to the group. See Custom Menus for more information. Check the checkbox to display the menu at login. 3. Select or clear the checkboxes for the following rights: Full Administrative Networking Services Secure Lantronix Network Date/Time Reboot & Shutdown Local Users Remote Authentication SSH Keys User Menus Web Access Diagnostics & Reports Firmware & Configuration Internal Modem Device Port Operations Device Port Configuration USB SD Card RPM Right to add, update, and delete all editable fields. Right to enter Network settings. Right to enable and disable system logging, SSH and Telnet logins, SNMP, and SMTP. Right to view and manage Secure Lantronix units (e.g., EMG, or SLC units) on the local subnet. Right to set the date and time. Right to shut down and reboot the EMG unit. Right to add or delete local users on the system. Right to assign a remote user to a user group and assign a set of rights to the user. Right to set SSH keys for authenticating users. Right to create a custom user menu for the CLI. Right to access Web-Manager. Right to obtain diagnostic information and reports about the unit. Right to upgrade the firmware on the unit and save or restore a configuration (all settings). Selecting this option automatically selects Reboot & Shutdown. Right to update internal modem settings. Right to control device ports. Right to enter device port settings. Right to enter modem settings for USB devices and control USB storage devices. Right to enter settings for SD card. Right to manage and control remote power managers. 4. Click the Add Group button. EMG™ Edge Management Gateway User Guide 324