Lantronix EMG 8500 EMG User Guide - Page 224

10: Device Ports Host Lists A host list is a prioritized list of SSH, Telnet, and TCP hosts available for establishing incoming modem connections or for the connect direct command on the CLI. The EMG unit cycles through the list until it successfully connects to one. To add a host list: 1. Click the Devices tab and select the Host Lists option. The following page displays: Figure 10-13 Devices > Host Lists 2. Enter the following: Note: To clear fields in the lower part of the page, click the Clear Host List button. Host List Id Host List Name Retry Count Authentication Displays after a host list is saved. Enter a name for the host list. Enter the number of times the EMG should attempt to retry connecting to the host list. Select to require authentication when the EMG unit connects to a host. 3. To add hosts, enter the following: Host Parameters Host Name or IP address of the host. EMG™ Edge Management Gateway User Guide 224