Lantronix EMG 8500 EMG User Guide - Page 73

6: Web and Command Line Interfaces  Options: Below each tab are options for specific types of settings. Note: Only those options for which the currently logged-in user has rights display. Figure 6-2 Sample Dashboard  Dashboard The Dashboard buttons allow you to view and configure EMG ports and interfaces. The appearance of the dashboard will differ according to the I/O and connectivity modules installed in the EMG and the type of network interface installed. See System Features on page 30. The dashboard buttons are defined below: Cellular connectivity settings for the LTE cellular module (if installed). See Cellular Modem Settings on page 93. DIO port settings. See DIO Port on page 219. USB device (flash drive or modem) plugged into the front panel USB connector. See Chapter 9: USB/SD Card Port. SD card settings. See Chapter 9: USB/SD Card Port. Internal modem settings. See Internal Modem Settings on page 215 Wi-Fi connectivity settings for the Wi-Fi module. See Wireless Settings on page 97. Network settings for the Ethernet port. See Network Port Settings on page 80. Network settings for the SFP transceiver port. See Network Port Settings on page 80. Device port settings for the device ports. Only ports to which the currently logged-in user has rights are enabled. See Device Ports - Settings on page 191. EMG™ Edge Management Gateway User Guide 73