Lantronix EMG 8500 EMG User Guide - Page 161

8: Services NFS Mounts Remote Directory Local Directory Read-Write Mount Mounted The remote NFS share directory in the format: nfs_server_hostname or ipaddr:/exported/path The local directory on the EMG on which to mount the remote directory. The EMG unit creates the local directory automatically. If enabled, indicates that the EMG can write files to the remote directory. If you plan to log port data or save configurations to this directory, you must enable this option. Select the checkbox to enable the EMG unit to mount the file to the NFS server. Disabled by default. Indicates if the EMG was able to successfully mount the NFS share directory. 3. Enter the following: SMB/CIFS Share Share SMB/CIFS Select the checkbox to enable the EMG to export an SMB/CIFS share called "public." directory Disabled by default. Network Interfaces Select the network ports from which the share can be seen. The default is for the share to be visible on both network ports. CIFS User Password/Retype Password Only one user special username (cifsuser) can access the CIFS share. Enter the CIFS user password in both password fields. The default user password is CIFSPASS. More than one user can access the share with the cifsuser user name and password at the same time. Workgroup The Windows workgroup to which the EMG unit belongs. Every PC exporting a CIFS share must belong to a workgroup. Can have up to 15 characters. 4. To save, click the Apply button. 5. Click the Firmware & Configurations link to access the Firmware & Configurations (on page 336) to save EMG configuration, as desired. NFS and SMB/CIFS Commands Go to NFS and SMB/CIFS Commands to view CLI commands which correspond to the web page entries described above. EMG™ Edge Management Gateway User Guide 161