Lantronix EMG 8500 EMG User Guide - Page 226

10: Device Ports To view or update a host list: 1. In the Host Lists table, select the host list and click the View Host List button. The list of hosts display in the Hosts box. Figure 10-14 Devices >View Host Lists 2. View or update the following: Host List Id Host List Name Retry Count Authentication View only. Displays after a host list is saved. Enter a name for the host list. Enter the number of times the EMG should attempt to retry connecting to the host list. Select to require authentication when the EMG unit connects to a host. 3. View, add, or update the host parameters: Host Protocol Port Name or IP address of the host. Protocol for connecting to the host (TCP, SSH, or Telnet). Port on the host to connect to EMG EMG™ Edge Management Gateway User Guide 226