Netgear R6250 User Manual - Page 123
Factory Settings
View all Netgear R6250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
R6250 Smart WiFi Router Factory Settings You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least 7 seconds. The router resets, and returns to the factory configuration settings shown in the following table. Table 3. Factory default settings Feature Default behavior Router login User login URL www.routerlogin.com or www.routerlogin.net User name (case-sensitive) admin Login password (case-sensitive) password Internet connection WAN MAC address WAN MTU size Use default hardware address 1500 Port speed AutoSensing Local network (LAN) LAN IP Subnet mask 192.168.1.1 255.255.255.0 DHCP server Enabled DHCP range 192.168.1.2 to 192.168.1.254 Time zone Pacific time Time zone daylight savings time Disabled Allow a registrar to configure this Enabled router Local network DHCP starting IP address (LAN) continued DHCP ending IP address 192.168.1.2 192.168.1.254 DMZ Disabled Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8 for NA Time zone adjusted for daylight savings time Disabled SNMP Disabled Firewall Inbound (communications coming Disabled (except traffic on port 80, the HTTP port) in from the Internet) Outbound (communications going Enabled (all) out to the Internet) Source MAC filtering Disabled Supplemental Information 124