Netgear R6250 User Manual - Page 95
Set Up a Repeater, Advanced > Advanced Setup > Wireless Repeating Function
View all Netgear R6250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
R6250 Smart WiFi Router 2. Select Advanced > Advanced Setup > Wireless Repeating Function. 3. Select the Enable Wireless Repeating Function check box. 4. Select the Wireless Base Station radio button. 5. (Optional) Select the Disable Wireless Client Association check box to prevent wireless clients from associating with the base station and allowing LAN client associations only. You can leave the check box cleared if you prefer wireless clients to be able to associate with the base stations. 6. In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access points that should function as repeaters. If your router is the base station, it can function as the "parent" for up to four other access points. 7. Click the Apply button. Your changes are saved. Set Up a Repeater Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless connection to the base station. Note: If you are using the router as the base station with a non-NETGEAR router as the repeater, you might need to change more configuration settings. In particular, you should disable the DHCP server function on the access point that is the repeater. Advanced Settings 95