Netgear R6250 User Manual - Page 38
Address Reservation, WPS Wizard for WiFi Connections
View all Netgear R6250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
R6250 Smart WiFi Router 4. (Optional) If this service is disabled and no other DHCP server is on your network, set your computer IP addresses manually so that the can access the router. Address Reservation When you specify a reserved IP address for a computer on the LAN, that computer always receives the same IP address each time it accesses the router's DHCP server. Assign reserved IP addresses to computers or servers that require permanent IP settings. To reserve an IP address: 1. Select Advanced > Setup > LAN Setup. 2. In the Address Reservation section of the screen, click the Add button. 3. In the IP Address field, type the IP address to assign to the computer or server. Choose an IP address from the router's LAN subnet, such as 192.168.1.x. 4. Type the MAC address of the computer or server. Tip: If the computer is already on your network, you can copy its MAC address from the Attached Devices screen and paste it here. 5. Click Apply. The reserved address is entered into the table. The reserved address is not assigned until the next time the computer contacts the router's DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release and renew. To edit or delete a reserved address entry: 1. Select the radio button next to the reserved address you want to edit or delete. 2. Click Edit or Delete. WPS Wizard for WiFi Connections The WPS Wizard helps you add a wireless computer or device to your WiFi network. On the computer or wireless device, either press its WPS button or locate its WPS PIN. 1. Select Advanced > WPS Wizard. 2. Click Next. Advanced Home Settings 38