Oki MC780f MC770/780 User Guide - Top Access - Page 146
Setting up Filtering
View all Oki MC780f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
8.[Administration] Tab Page 8 [Administration] Tab Page Item name 9 Obtain a SNTP Server Address automatically Description Select [Enable] when you want to obtain a SNTP server address automatically using the DHCP server. This setting will apply only when [No AutoIP] or [Dynamic] is selected in the Address Mode option. [Disable] is set as the default. When the DHCP server does not have a SNTP server address, the data are left blank in the SNTP server address even if you set the correct SNTP server address manually in the SNTP Network Service. In that case, select [Disable] here and set the correct SNTP server address in the SNTP Network Service. P.141 "Setting up SNTP Service" 10 IP Conflict Detect Specify whether or not to detect IP address conflicts. Select [Enable] to display a message on the control panel when an IP address conflict is detected. [Enable] is set as the default. 11 IP Address Enter the static IP address for your equipment when [Static IP] is selected in the [Address Mode] box. Specify within the range from 0 0 0 0 to 255 255 255 255. However, you cannot set 0.0.0.0 and 255.255.255.255. 12 Subnet Mask Enter the subnet mask if required when [Static IP] is selected in the [Address Mode] box. Specify within the range from 0 0 0 0 to 255 255 255 255. However, you cannot set 0.0.0.0 and 255.255.255.255. 13 Default Gateway Enter the gateway address if required when [Static IP] is selected in the [Address Mode] box. Specify within the range from 0 0 0 0 to 255 255 255 255. However, you cannot set 0.0.0.0 and 255.255.255.255. Setting up Filtering You can set filtering in order to restrict access from client computers to this equipment. Filtering can be specified with an IP address or a MAC address. MAC address filtering is given priority over IP address filtering. 1 2 3 4 5 6 [Setup] Item List 145