Oki MC780f MC770/780 User Guide - Top Access - Page 149
Setting up IPX/SPX, Use DHCPv6 Server for IP AddressM flag
View all Oki MC780f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
8 [Administration] Tab Page Item name 5 Use Stateless Address Description Use the IPv6 addresses (Stateless addresses) issued from routers. y Use DHCPv6 Server for IP Address(M flag) - Use the IPv6 address issued from the DHCPv6 server in the stateless network environment. y Use DHCPv6 Server for options(O flag) - Use the optional information (IPv6 address for the DNS server, etc.) issued from the DHCPv6 server in the stateless network environment. y FQDN Option - The FQDN option is available if Use DHCPv6 Server for IP Address is selected. Select [Server] or [Client] for [Update Method] if using the FQDN option. [Server] is set as the default. y IP Address - Stateless Addresses obtained from routers are displayed. Up to 7 IPv6 addresses can be retained. When this equipment receives a router advertisement (RA) from a router, of which M flag configuration is "0", the DHCPv6 function is disabled. If you change a router advertisement (RA) M flag configuration from "0" to "1", it is necessary to reboot this equipment to enable the DHCPv6 function. 6 Use Stateful Address Use the Stateful address issued from DHCPv6 server. y Use DHCPv6 Server for IP Address - Select whether or not the IPv6 address which is issued from the DHCPv6 server is used for this equipment. y Use DHCPv6 Server for options - Select whether or not the optional information (IPv6 address for the DNS server, etc.) except the IPv6 address for this equipment, which is issued from the DHCPv6 server is used on this equipment. y FQDN Option - The FQDN option is available if Use DHCPv6 Server for IP Address is selected. Select [Server] or [Client] for [Update Method] if using the FQDN option. [Server] is set as the default. y IP Address - A stateful address, Prefix Length and Gateway obtained from DHCPv6 Server are displayed. Setting up IPX/SPX You can set the IPX/SPX protocol to enable the communication over IPX/SPX. The IPX/SPX must be configured to enable Novell printing with NetWare server 5.1, 6.0, 6.5 over IPX/SPX. 1 2 3 Item name 1 Enable IPX/SPX 2 Frame Type 3 Actual Frame Description Select whether the IPX/SPX protocol is enabled or disabled. Enable this when configuring Novell printing over the IPX/SPX network. [Disable] is set as the default. Select the desired frame type for IPX/SPX. y Auto Sense - Select this to use an appropriate frame type that the equipment found first. y IEEE 802.3/Ethernet II/IEEE 802.3 Snap/IEEE 802.2 - Instead of [Auto Sense], select the frame types to be used from these options. Displays the actual frame type of the equipment. 148 [Setup] Item List