Oki MC780f MC770/780 User Guide - Top Access - Page 175

8 [Administration] Tab Page [Add Filter] / [Modify Filter] screen You can display this screen by clicking the [Add] button for Filter or a registered filter name. You can create a filter to use in IPsec. 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 Item name 1 [OK] button 2 [Cancel] button 3 [Reset] button 4 Filter Name 5 Internet Protocol Version 6 Source Address 7 Destination Address 8 Protocol Type Description Saves the folder setting. Cancels registration of the folder. Returns the settings to the defaults. Enter a filter name. You can enter up to 63 alphanumerical characters and symbols other than backslash), ' (apostrophe), ; (semicolon), , (comma), ", and =. Select the IP version for IPsec. y IPv4 - Select this to use IPsec under the IPv4 environment. y IPv6 - Select this to use IPsec under the IPv6 environment. The IP address of this equipment is set as the source address to which the filter is applied. [My IP Address] is displayed in this box. This item cannot be changed. Specify the destination address for the communication to which the filter is applied. y Specific IP Address - Set a specific IP address. Enter the IP address in the address input box. y Subnet / Prefix - Set the destination with its IP address and subnet mask. Enter the IP address and the prefix of the subnet mask directly in the address input box. y FQDN - Sets FQDN for the destination. Enter FQDN in the address input box. You can enter up to 255 alphanumerical characters including hyphen (-) and period (.). However, neither hyphen (-) nor period (.) can be used as first or last character. y Any IP Address - Set any IP address. Select a protocol for the filter. y Any - Set any protocol. y TCP - Select this to use TCP only. y UDP - Select this to use UDP only. y ICMP - Select this to use ICMP only. 174 [Setup] Item List