Oki MC780f MC770/780 User Guide - Top Access - Page 188

8.[Administration] Tab Page 8 [Administration] Tab Page Item name 6 Reception Mode 7 Dial Type Description Select how this equipment activates when a fax is received. y Auto - Select this to automatically receive incoming originals when the bell rings. Select this when the line is being used exclusively by the fax transmission. y Manual - Select this to manually receive incoming originals after pressing the [Start] button on the control panel. y TEL/FAX - Select this to automatically detect whether the incoming call is a telephone call or a fax transmission. Select this option when connecting this equipment to a line which is also used as a telephone line. Select the dial type for Line 1. y DP - Select this to use the Dial Pulse type for Line 1. y MF - Select this to use Multi-frequency type for Line 1. The following items are displayed for some models. - 10PPS - Select this to use the Dial Pulse type for 10PPS. - 20PPS - Select this to use the Dial Pulse type for 20PPS. - PB - Select this to use a tone type push phone line. 8 Resolution Select the default resolution for sending faxes. y Standard - Select this to use the standard mode as the default resolution. This mode is suitable when you are frequently transmitting text documents with normal size characters. y Fine - Select this to use the fine mode as the default resolution. This mode is suitable when you are transmitting documents with small size characters or fine drawings. y Ultra Fine - Select this to use the ultra fine mode as the default resolution. This mode is suitable when you are transmitting documents with very small size characters or detailed drawings. 9 Original Mode Select the default image quality mode for sending faxes. y Text - Select this to set the Text mode as the default image quality mode appropriate for sending text originals. y Text/Photo - Select this to set the Text/Photo mode as the default image quality mode appropriate for sending originals containing both text and photos. y Photo - Select this to set the Photo mode as the default image quality mode appropriate for sending photo originals. 10 Exposure Select the default exposure for sending faxes. Select [Auto] to automatically apply the ideal contrast according to the original or select the contrast manually in 11 stages. 11 TTI Switch the TTI recording ON or OFF. To enable this feature, the Terminal ID must be registered to this equipment in advance. y ON - Select this to set to add the source information to the TTI. y OFF - Select this to set not to add the source information. 12 RTI Select whether to print a reception header (RTI) on received faxes to clearly identify the time, date, and page count of received faxes. 13 ECM Select whether to enable or disable the ECM (Error Correction Mode) to automatically resend any portion of the document affected by phone line noise or distortion. 14 Discard Select whether to discard the lower portion of the received fax image if it is larger than the recording paper. 15 Reduction Select whether to reduce the received fax image if it is larger than the effective printing area of the recording paper. 16 Duplex Print Select whether to print the received fax images on both sides of the recording paper. Available only when the Automatic Duplexing Unit is installed. 17 Recovery Transmit Select whether to re-transmit a fax after failing the initially specified number of redial attempts. When this is enabled, select the stored time length from 1 to 24 hours. 18 Journal Auto Print Select whether to automatically print a transmission and reception journal after every transmission completed. 19 Memory Transmission Report Select how to print a result report after a memory transmission. y OFF - Select this to not print a memory transmission report. y Always - Select this to print a memory transmission report with all page images for each memory transmission completed. y ON ERROR - Select this to print a memory transmission report with all page images only when the memory transmission is not successfully completed. y Always(Print 1st Page Image) - Select this to print a memory transmission report with the 1st page image for each memory transmission completed. y ON ERROR(Print 1st Page Image) - Select this to print a memory transmission report with the 1st page image only when the memory transmission is not successful. [Setup] Item List 187