Palm 1065NA User Guide - Page 21

CHAPTER SETTING UP 2 5 Slide the back panel back into place. Your smartphone screen turns on. It takes a few minutes for your smartphone to prepare for setup-you'll see the Palm® logo and a blank Windows Mobile screen. You are ready to begin setup when text appears prompting you to tap the screen. TIP If your smartphone does not turn on after you insert the battery, you need to connect it to the USB AC charger to charge it (see Charging the battery). If it still doesn't start, perform a soft reset (see Performing a soft reset). Charging the battery Although the battery may come with a sufficient charge to complete the setup process, we recommend that after setup you charge your smartphone until the indicator light is solid green to give it a full charge. See Maximizing battery life for tips on making your battery's power last longer. BEFORE YOU BEGIN Make sure the battery is correctly inserted in your smartphone. 6 Follow the onscreen instructions to finish the installation. If prompted, tap Reboot to complete setup. 7 If your SIM card is not already activated, follow the activation steps provided by your wireless service provider, or contact your wireless service provider directly for assistance. 1 If you have international adapters in your smartphone package, prepare the USB AC charger by inserting the adapter that fits the wall outlet you're going to use. 2 Plug the USB AC charger into a wall outlet. 3 Connect the charger cable to the bottom of your smartphone. C H A R G I N G T H E B A T T E R Y 21