Panasonic AW-HE130 Operating Instructions

Panasonic AW-HE130 Manual

Get Panasonic AW-HE130 PDF manuals and user guides View all Panasonic AW-HE130 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AW-HE130 manual content summary:

  • Panasonic AW-HE130 | Operating Instructions - Page 1
    Operating Instruction HD Integrated Camera Model No. AW-HE130W Model No. AW-HE130K Before operating this product, please read the instructions carefully and save this manual for future use. zzAbout the instruction manuals • Operating Instructions (this document): This manual describes how to
  • Panasonic AW-HE130 | Operating Instructions - Page 2
    AW HE130WP, AW HE130KP) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE servicing) instructions or foreign Panasonic authorized service center for
  • Panasonic AW-HE130 | Operating Instructions - Page 3
    AW HE130WP, AW used in accordance with the instruction manual, may cause harmful interference it must be connected to PC by compatible interface cable with two ferrite cores. Also, any of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
  • Panasonic AW-HE130 | Operating Instructions - Page 4
    Read this first! (For AW HE130WE, AW HE130KE) WARNING: This equipment must be earthed. To ensure safe of electric shock, do not remove the covers. No user serviceable parts inside. Refer servicing to qualified service personnel. indicates safety information. EEE Yönetmeliğine Uygundur. EEE
  • Panasonic AW-HE130 | Operating Instructions - Page 5
    For AW HE130WE, AW HE130KE) ( applications, for SDI (Serial Digital Interface). Coaxial cables, which are designed signal connecting cables If your apparatus supports AES/EBU serial digital audio be attached on cable(s) following instructions in this manual. 3. Performance level The performance
  • Panasonic AW-HE130 | Operating Instructions - Page 6
    Read this first! (For AW HE130WE, AW HE130KE) (continued) Caution for AC Mains Lead FOR YOUR SAFETY PLEASE until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. How to replace the fuse 1. Open the fuse compartment with a screwdriver. 2.
  • Panasonic AW-HE130 | Operating Instructions - Page 7
    Read this first! (For AW HE130WE, AW HE130KE) (continued) Note on grounding • Ground the unit via the ground connector. Ground connector to ground connector on wall outlet, ground bar, etc. 7
  • Panasonic AW-HE130 | Operating Instructions - Page 8
    Read this first! (For AW HE130WP, AW HE130KP 2 Read this first! (For AW HE130WE, AW HE130KE 4 Note on grounding 7 Before use 10 Overview 10 Computer requirements 10 Disclaimer of warranty 11 Network security 11 Features 12 Controller supported 13 Accessories 14 Optional accessories
  • Panasonic AW-HE130 | Operating Instructions - Page 9
    Multimedia Interface are Instructions software provided with this unit are expressly prohibited. „„Abbreviations The following abbreviations are used in this manual AW‑HE130W AW‑HE130K AW‑HS50N AW‑PS550N AW‑RP50N AW-RP120G AK-HRP200G Model number given in manual AW‑HE130 AW‑HS50 AW‑PS550 AW‑RP50 AW
  • Panasonic AW-HE130 | Operating Instructions - Page 10
    unit supports standard serial communication formats, allowing connection to commercially available controllers. • Connection with a Panasonic camera controller is also possible via Panasonic's proprietary serial communication format. • The unit is available in white (AW-HE130W) or black (AW-HE130K
  • Panasonic AW-HE130 | Operating Instructions - Page 11
    • Depending on the software version of the unit, an update may be necessary. • Use the desktop version of Internet Explorer. (Internet Explorer for Windows UI is not supported.) • For the latest information on compatible operating systems and web browsers, visit the support desk at the following
  • Panasonic AW-HE130 | Operating Instructions - Page 12
    its integration IP control allows for a wide range of applications, such as controlling the camera from remote locations. „„Standard serial communication support • Connect up to seven cameras to a commercially available controller via RS-232C interface. „„High degree of compatibility with Panasonic
  • Panasonic AW-HE130 | Operating Instructions - Page 13
    zzAW-RP50 zzAK-HRP200 • It may be necessary to upgrade the version of the controller in order to support the unit. Consult with your dealer. • The following operations can not be performed via the following controllers. Item Gain configuration AW-RP400 AW-CB400 AW-RP555 AW-RP655 13
  • Panasonic AW-HE130 | Operating Instructions - Page 14
    Instruction • Easy IP Setup Software (EasyIPSetup.exe) Drop-prevention wire. (1) Bracket mounting screws Drop-prevention wire mounting (bind-head) screw(1) M4×10 mm (4) (comes attached to the unit) Cable cover (1) AC adaptor (1) Optional accessories zzWireless remote controller AW
  • Panasonic AW-HE130 | Operating Instructions - Page 15
    reduction of its service life. (Recommended temperature the focus at the manual setting, proceed with zooming „„Concerning the HDMI interface standard This unit IP address setting Do not run the Easy IP Setup Software on a multiple number of personal computers for a single camera and set the IP
  • Panasonic AW-HE130 | Operating Instructions - Page 16
    camera head by hand. Turning the camera end of its service life and is software. This product included MIT Licensed software. This product included BSD Licensed software. For details on obtaining the source codes, visit the following website. http://panasonic.biz/sav/ However, do not contact Panasonic
  • Panasonic AW-HE130 | Operating Instructions - Page 17
    unit can be operated by remote control using a wireless remote control (model number: AW‑RM50G) purchased separately. Check out the following points before using the wireless remote control. zzPoint the wireless remote control at the unit's wireless remote control signal light-sensing area (front
  • Panasonic AW-HE130 | Operating Instructions - Page 18
    main unit. Loop the circle part of the wire around the hook of the mount bracket. 3. Hole for securing the camera pedestal This hole is provided in the bottom panel of the camera pedestal. 4. Wireless remote control signal light-sensing area The light-sensing area is provided in three places, on
  • Panasonic AW-HE130 | Operating Instructions - Page 19
    turning the unit on. • Cameras whose camera address setting switches are set to AUTO cannot coexist with cameras whose switches are set to 1 to 7. • Manually setting multiple cameras to the same address will not allow you to control multiple cameras from a single controller simultaneously. 19
  • Panasonic AW-HE130 | Operating Instructions - Page 20
    cameras are set to AUTO, addresses will be assigned to the cameras automatically in response operation from the controller in the order in which the cameras were connected. To manually set to OFF, Panasonic's proprietary serial communication is zzSDI/HDMI/VIDEO output Format HD/SDI SD/SDI 1080/59
  • Panasonic AW-HE130 | Operating Instructions - Page 21
    time it is pressed, the signals are switched between the color bar signals and camera video signals. • The setting for the Down CONV. Mode item when preset memories No.13 and above cannot be called from the wireless remote control. 9. PRESET/LIMIT button This is used to register
  • Panasonic AW-HE130 | Operating Instructions - Page 22
    adjusting the lens focus. 13.M/FOCUS button This is used when manually adjusting the lens focus. The FOCUS buttons ( and ) are used when have been called can be changed using the Preset Speed item of the camera menu. 18.SLOW button This is used to change the movement
  • Panasonic AW-HE130 | Operating Instructions - Page 23
    to be changed. „„Setting procedure Operate the IR ID switch on the units rear panel, and select "CAM1", "CAM2", "CAM3" or "CAM4" as the remote control ID. (→page 19) The IR ID switch settings "CAM1" to "CAM4" correspond to the to buttons on the wireless remote
  • Panasonic AW-HE130 | Operating Instructions - Page 24
    of Easy IP Setup Software programs at the same time for a single camera. Similarly, do not perform the "Auto IP setting" operation of the AW‑RP50 remote camera controller at the same time. The IP address settings may no longer be recognized as a result. • The Easy IP Setup Software is designed
  • Panasonic AW-HE130 | Operating Instructions - Page 25
    mode. When performing operations from a controller When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. When using a commercially available controller Refer to the operating instructions for the controller. Turning the power off When performing
  • Panasonic AW-HE130 | Operating Instructions - Page 26
    matched by the remote control ID has been received, and it blinks orange when a signal that is not matched by the remote control ID has been received. When performing operations from a controller When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. 26
  • Panasonic AW-HE130 | Operating Instructions - Page 27
    cannot be operated manually. To operate them manually, switch from the auto settings to the manual settings as required. camera menu display is exited. When performing operations from a controller When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller.
  • Panasonic AW-HE130 | Operating Instructions - Page 28
    , zoom, focus and iris are controlled are now switched. When performing operations from a controller „„Changing the camera's direction Moving the camera toward the left or right (panning speed When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. 28
  • Panasonic AW-HE130 | Operating Instructions - Page 29
    What to do when encountering problems in the basic shooting operations If the trouble is not resolved by taking the action suggested below, refer to "Troubleshooting" (→ page 114). When performing operations from a wireless remote control The unit does not move. • Press the , ,
  • Panasonic AW-HE130 | Operating Instructions - Page 30
    a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. Manually adjusting the gain There are two ways to adjust the gain. One way involves using the buttons on the wireless remote control or controller; the other way involves using the Camera menu or Web setting
  • Panasonic AW-HE130 | Operating Instructions - Page 31
    the type of wireless remote control or controller that is used for operation. • The focus and iris operating modes (manual and auto settings) are memory setting has been registered. When performing operations from a controller When using a AW-RP50, AW-RP120, or AK-HRP200 Up to 100 entries can be
  • Panasonic AW-HE130 | Operating Instructions - Page 32
    their setup procedure will be completed simply by selecting them using the camera menus or web settings, or by pressing the buttons on the controller, When performing operations from a wireless remote control 1. Shoot a white subject (such as a white wall or handkerchief) so that it fills the
  • Panasonic AW-HE130 | Operating Instructions - Page 33
    cannot be performed while the color bar is displayed. Switch to the camera image by pressing the button. • When the adjustment has failed performing operations from a controller When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. •
  • Panasonic AW-HE130 | Operating Instructions - Page 34
    controller When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. Automatic adjustment When performing operations from a wireless remote control The while the color bar is displayed. Switch to the camera image by pressing the button. 34
  • Panasonic AW-HE130 | Operating Instructions - Page 35
    a wireless remote control 1. Press the button. Set the iris to the manual mode. 2. Press controller When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller button for about 2 seconds. The camera menu display is exited. 9. If necessary, press
  • Panasonic AW-HE130 | Operating Instructions - Page 36
    multiple number of cameras will be used or when the unit will be used in combination with other devices. This unit supports BBS (Black 2 seconds. The camera menu display is exited. When performing operations from a controller These operations can be performed using the camera menus by following the
  • Panasonic AW-HE130 | Operating Instructions - Page 37
    may differ from the ones used for the convertible cameras and HD integrated cameras which have already been released on the market. For details, refer to the Operating Instructions of the camera concerned. • The response speed of the camera differs slightly depending on the controller used. 37
  • Panasonic AW-HE130 | Operating Instructions - Page 38
    (continued) „„Operations for controllers that are not supported Camera menu operation Selecting a camera to operate Displaying the Top Menu Selecting items Displaying sub-menus Returning to the previous menu Changing settings Canceling setting changes Exiting camera menu operations Unsupported
  • Panasonic AW-HE130 | Operating Instructions - Page 39
    Basic operations (continued) When performing the operations using the wireless remote control 1. Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit which is to be 9. After the setting has been completed, press the [MENU] button for 2 seconds. The camera menu display is exited. 39
  • Panasonic AW-HE130 | Operating Instructions - Page 40
    Basic operations (continued) Operations on the AW‑RP50 Remote Camera Controller POWER ALARM F1 F2 F1 CAMERA OSD MENU STORE PAGE DELETE 1 2 3 4 5 GAIN/PED R/B GAIN R/B PED AWB/ABB SHUTTER 6 7 8 9 10 DETAIL SCENE/MODE CAMERA SETUP PRESET MEMORY / MENU SYSTEM F2 EXIT USER1
  • Panasonic AW-HE130 | Operating Instructions - Page 41
    preset playback images. „„Optical image stabilization settings (OIS) 1. Press the button on the AW-RP50. The button lights, and the buttons become selectable. 2. Press the button in the area. The button lights, and the [USER] menu
  • Panasonic AW-HE130 | Operating Instructions - Page 42
    to ) to select the unit you want to operate. 2. Press and hold the button on the AWRP120 for about 2 seconds. The AW‑HE130 camera menu appears on the monitor. 3. Turn the dial to select an AW‑HE130 camera menu item or to change a setting value. Turn the dial to move the
  • Panasonic AW-HE130 | Operating Instructions - Page 43
    for freezing images during preset playback (FREEZE DURING) and color temperature settings (COLOR TEMP) to the buttons. 1. Press the button on the AW-RP120. The button lights. 2. Press the FUNCTION menu button. The button lights, and the [USER1] menu appears on the LCD panel
  • Panasonic AW-HE130 | Operating Instructions - Page 44
    menu operation 1. Press and hold the button on the AKHRP200 for about 2 seconds. The AW‑HE130 camera menu appears on the monitor. 2. Turn the dial to select an AW‑HE130 camera menu item or to change a setting value. Turn the dial to move the cursor up and down or
  • Panasonic AW-HE130 | Operating Instructions - Page 45
    the AK-HRP200 Operating Instructions . Control/display component Label HE130 1 Camera power switch HEAD POWER Supported 2 VF power GAIN display 34 M.PED display SHUTTER display selection 35 Switch AUTO BLACK AUTO SETUP 5600k MATRIX SKIN DTL ON KNEE OFF DTL OFF SHUTTER ON STEP/SYNC
  • Panasonic AW-HE130 | Operating Instructions - Page 46
    Basic operations (continued) Control/display component 42 Rotary selection switch 43 Red/green SD CARD HE130 Supported Supported with some restrictions ― ― Supported Supported with some restrictions Supported ― ― Supported ― Supported with some restrictions Supported Supported Supported Remarks
  • Panasonic AW-HE130 | Operating Instructions - Page 47
    Maintenance Select this to display the Maintenance menu used to check the camera's firmware version or initialize its settings. • The Top Menu does not have a "Return" setting. To close the menu screen, use the controller to perform the operation to close the menu screen. For further details
  • Panasonic AW-HE130 | Operating Instructions - Page 48
    or manually. Manual: The iris is adjusted manually. Auto camera shutter speed. Off: The shutter is set to OFF. Step: The step shutter is set (the steps can be changed). Synchro: The synchro shutter is set (the setting can be changed continuously). ELC: The electronic shutter is controlled
  • Panasonic AW-HE130 | Operating Instructions - Page 49
    Camera menu items (continued) [When 50 Hz has been set as the unit's frequency] When [Step] focus functions will be disabled when [Frame Mix] is set to [18dB] or [24dB]. (Only manual operation will be possible.) • Under discharge tube illumination, such as fluorescent and mercury- vapor
  • Panasonic AW-HE130 | Operating Instructions - Page 50
    Camera menu items (continued) Picture 1/3 screen Picture 1/3 Chroma Level White Balance Mode Color Temperature R Gain 31 V Detail Level 0 Detail Band 0 Noise Suppress 1 FleshTone NoiseSUP. 16 Gamma Type HD Gamma 0.45 DRS Off Return Detail [Off, On] This enables the B pedestal to
  • Panasonic AW-HE130 | Operating Instructions - Page 51
    Camera menu items (continued) Picture 3/3 screen Picture 3/3 Knee Mode Knee Point Knee Slope White Clip White Clip Level DNR Auto 93.0% 85 On 109% Off Matrix 1/5 screen Matrix 1/5 Matrix Type Normal Return Knee Mode [Off, Auto, Manual] Set the operating mode for gradation compression (knee).
  • Panasonic AW-HE130 | Operating Instructions - Page 52
    Camera menu items (continued) Matrix 2/5 screen Matrix 2/5 [Linear Matrix] R-G 0 R-B 0 G-R 0 G-B 0 B-R 0 B-G 0 Return Linear Matrix This can be set when "User" has been selected as the "Matrix Type" setting. R-G [-
  • Panasonic AW-HE130 | Operating Instructions - Page 53
    Camera menu items (continued) Matrix 4/5 screen Matrix 4/5 [Color Correction 2/3] Saturation Phase R_Yl 0 0 R_Yl_Yl 0 0 Yl 0 0 Yl_G 0 0 G 0 0 G_Cy 0 0 Return Color Correction 2/3 This can be set when [User] has
  • Panasonic AW-HE130 | Operating Instructions - Page 54
    Output This displays the [Output] screen on which to select the camera's output image settings. Others This displays the [Other] screen on which Return to the previous menu level. • The horizontal phases of the HD and SD signals cannot be adjusted separately. Neither is it possible to adjust
  • Panasonic AW-HE130 | Operating Instructions - Page 55
    Camera menu items (continued) Output screen Output Format 1080/59.94i Down CONV. Mode Squeeze Frequency 59.94Hz Color Bars Setup Off Return Format [(For 59.94Hz) 1080/59.94p, 1080/29.97p, 1080/23.98p, 1080/59.94i, 1080/29.97PsF, 1080/23.98PsF, 720/
  • Panasonic AW-HE130 | Operating Instructions - Page 56
    Camera menu items (continued) „„Changing the format When the currently selected format is Set screen appears. Frequency Set screen Frequency Frequency(59.94Hz) Set • When you switch from an HD format to an SD format or vice versa, the unit automatically restarts after the Format Set screen appears
  • Panasonic AW-HE130 | Operating Instructions - Page 57
    AW-HE120 will be applied. Preset Speed [1 to 30] Set the pan/tilt movement speed used when recalling camera Manual] Select auto or manual mode for the focus adjustment function. Auto:Always adjust focus automatically. Manual: Adjust focus manually. Focus ADJ With PTZ the tally control signal. Tally
  • Panasonic AW-HE130 | Operating Instructions - Page 58
    Camera menu items (continued) Other 3/4 screen Others 3/4 Wireless Control Enable OSD Mix SDI Out On HDMI Out On Video Out On IP On OSD Off Reserved7] Set the protocol model for standard serial communication. Appears when the service switch (SW4) at the bottom of the unit is set to ON
  • Panasonic AW-HE130 | Operating Instructions - Page 59
    menu items (continued) Maintenance screen Maintenance Firmware Version IP Network Initialize Firmware VER 1/2 screen Firmware VER 1/2 CPU Software Interface Camera Main Servo Network EEPROM Interface V01.00 V01.00 V01.00 V01.00 V01.00 Return Firmware Version This is selected to display the
  • Panasonic AW-HE130 | Operating Instructions - Page 60
    IP Address], [Subnet Mask] and [Default Gateway] settings can be displayed but they cannot be changed. To change an address, use "Network" (→page @@) on the Web setting screen or "Easy IP Setup Software the camera settings are restored to the settings which were established when the camera was
  • Panasonic AW-HE130 | Operating Instructions - Page 61
    Factory setting Selection items Top Menu Camera Scene Scene Scene1 Brightness Brightness Picture to 62 -7 to +7 -7 to +7 0 to 60 0 to 31 HD, SD, FILMLIKE1, FILMLIKE2, FILMLIKE3 0.30 to 0.75 (Step: 0.01) Off, Low, Mid, High Off, Auto, Manual 70.0% to 107.0% (Step: 0.5%) 0 to 99 Off, On 90%
  • Panasonic AW-HE130 | Operating Instructions - Page 62
    menu items (continued) Camera menu Top Menu Camera Scene Matrix Genlock Output Matrix 1/5 Matrix 2/5 Matrix 3/5 Matrix 4/5 Matrix Horizontal Phase Step Format Down CONV. Mode HDMI Color Frequency Color Bars Setup Factory setting Selection items Normal Normal EBU Normal EBU Normal EBU Normal
  • Panasonic AW-HE130 | Operating Instructions - Page 63
    Audio Off Input Volume Line Middle Plugin Power Protocol Model Select Off SEVIHD1 CPU Software Interface Camera Main Servo Network EEPROM Interface FPGA Lens AVIO Com IP Address Subnet Mask Default Gateway --- Version at shipping Version at shipping Version at shipping Version at shipping
  • Panasonic AW-HE130 | Operating Instructions - Page 64
    connected to the unit, it is possible to view the camera's IP videos or select various settings from the web browser screen. The LAN crossover cable is used when connecting a personal computer directly to the unit's LAN connector for IP control, and the LAN straight cable is used when making the
  • Panasonic AW-HE130 | Operating Instructions - Page 65
    instructions to install the software. For further details, refer to "Plug-in viewer software (Network Camera View 4S)" (→ page @@). • When "User Authentication" (→ page @@) is set to "On", the user name and password input screen is displayed before the Live screen page appears. The default control
  • Panasonic AW-HE130 | Operating Instructions - Page 66
    IP images from multiple cameras. See below for details on the single display mode, and see page @@ for details on the multi display mode. Live screen: Single display mode You can display images from the camera on a computer and perform camera operations, such as pan, tilt, zoom, and focus control
  • Panasonic AW-HE130 | Operating Instructions - Page 67
    Web screen operations (continued) 1. Multi-Screen list box (Multi-screen) The Live screen display method is selected here. (Single) The IP videos of the connected camera are displayed. (4Split 1/4 Group) (4Split 2/4 Group) (4Split 3/4 Group) (4Split 4/4 Group) When the cameras for multi-
  • Panasonic AW-HE130 | Operating Instructions - Page 68
    Web 10.Main area (IP video display area) The IP video of the connected camera will be displayed. However, depending on the settings for the "Bandwidth control(bit rate)" and "Max bit rate (per (Far) Use this to switch between auto and manual focusing. When Auto is selected, the focus is adjusted
  • Panasonic AW-HE130 | Operating Instructions - Page 69
    Web screen operations (continued) 13.Control pad and its buttons To adjust the image in the horizontal or vertical direction (panning or tilting), left-click the pad and the buttons. The more the outside of the pad is clicked, the faster the camera adjustment between auto and manual. When Auto is
  • Panasonic AW-HE130 | Operating Instructions - Page 70
    (Multi-screen) The Live screen display method is selected here. (Single) The IP videos of the connected camera are displayed. (4Split 4/1 Group) (4Split 4/2 Group) (4Split 4/3 Group) (4Split 4/4 Group) When the cameras for multi-screen display have been set ahead of time using the multiscreen
  • Panasonic AW-HE130 | Operating Instructions - Page 71
    Web screen configurations Logging into the Setup screen 1. Click the [Setup] button. (→ page @@) The login screen appears. 3. Click the [OK] button. Click [OK] again when the following screen appears. 2. Enter the user name and password. The default settings for the user name and password are as
  • Panasonic AW-HE130 | Operating Instructions - Page 72
    Web Setup] screen are also disabled. 8. Main area The menu screen is displayed. 9. Camera Camera title Input the name of the camera here. When the Set button is clicked, the input name appears in the camera title display area. • The initial setting is "AW-HE130 plug-in viewer software. Setting value:
  • Panasonic AW-HE130 | Operating Instructions - Page 73
    Web screen configurations (continued) Image screen „„IP video settings tab (Video over IP) The JPEG image and H.264 image settings as well as the settings related to image quality are selected on this screen. zzInitial display settings for "
  • Panasonic AW-HE130 | Operating Instructions - Page 74
    Web screen configurations (continued) Internet mode (over HTTP) This setting is selected [Framerate]. Images will be transmitted so that the average transmission volume during the duration specified in [Control time period] will be the bit rate specified in [Max bit rate (per client)]. Factory
  • Panasonic AW-HE130 | Operating Instructions - Page 75
    Web the [Bandwidth control (bitrate)] manually when images and audio are sent from the camera. When transmitting H.264 images via the Internet, configure a fixed transmission port for the broadband router (hereafter referred to as "router") (→ page @@). For details, refer to the operating instructions
  • Panasonic AW-HE130 | Operating Instructions - Page 76
    Web screen configurations (continued) Multicast address*2 Enter the multicast IP address. Images and audio will be sent to the specified IP computer. All settings and controls related to audio will be camera via line input. Line Low Set the volume to low. Use this when audio is input to the camera
  • Panasonic AW-HE130 | Operating Instructions - Page 77
    Web screen configurations (continued) „„Image / Position screen Display the image quality adjustment / preset position screen. zzImage adjust screen Adjust the image quality. To display the Image adjust screen, click the Setup to adjust detailed settings manually for various shooting conditions
  • Panasonic AW-HE130 | Operating Instructions - Page 78
    Web screen configurations (continued) Shutter Mode Select for camera can be changed continuously). ELC The electronic shutter is controlled and the light quantity is adjusted automatically. The shutter is set to [18dB] or [24dB]. (Only manual operation will be possible.) • Under discharge
  • Panasonic AW-HE130 | Operating Instructions - Page 79
    Web screen configurations (continued) Picture Chroma Level Set here is the color intensity (chroma level) of the images. Setting range: OFF, -99% to 40% White Balance
  • Panasonic AW-HE130 | Operating Instructions - Page 80
    Web screen configurations (continued gamma curve. Setting value: HD HD (High Definition) video gamma characteristic. SD Gain in darks areas is higher than in Set the knee slope. This is only enabled when [Knee Mode] is set to [Manual]. Setting range: 0 to 99 • When [DRS] is enabled, the
  • Panasonic AW-HE130 | Operating Instructions - Page 81
    Web screen configurations (continued) zzMatrix Settings screen Set matrix settings. To display the Matrix Settings screen, click the Setup button for [Matrix Type] at the bottom of the Image/Position screen. Matrix Type Select the type of color matrix. Setting value: Normal EBU Load
  • Panasonic AW-HE130 | Operating Instructions - Page 82
    Web screen configurations (continued) zzPreset position screen Adjust the image quality. To display the Image adjust screen, click the Setup pull‑down menu. (Move) The camera direction moves to the preset position which brightness adjustment between auto and manual. Control pad and its buttons To
  • Panasonic AW-HE130 | Operating Instructions - Page 83
    Web operations. Focus ADJ With PTZ. "Off" or "On This item can be selected only when "Manual" has been selected as the "Focus /tilt movement speed used when recalling camera orientation information registered to the preset Preset Speed] values equivalent to the AW-HE120 will be applied. Preset Scope
  • Panasonic AW-HE130 | Operating Instructions - Page 84
    Web screen configurations (continued) „„System screen This menu has items that relate to the genlock phase adjustment and camera • When you switch from an HD format to an SD format or vice versa, required will differ depending on the color gradation supported by the monitor. RGB-NOR The RGB
  • Panasonic AW-HE130 | Operating Instructions - Page 85
    Web Setup This is only enabled when "Frequency" is set to "59.94Hz". Select the color bar setup /right control for recalling camera the AW-HE120 manual mode for the focus adjustment function. Setting value: Auto Always adjust focus automatically. Manual Adjust focus manually. Focus ADJ With PTZ
  • Panasonic AW-HE130 | Operating Instructions - Page 86
    when the service switch (SW4) at the bottom of the unit is set to ON (standard serial communication). Setting value: SEVIHD1 / SBRC300 / SBRCZ330 / Reserved1 to 7 Multi-Screen setup screen The cameras whose images are to be displayed on the multi screen are set here. (→page@@, page @@) IP address
  • Panasonic AW-HE130 | Operating Instructions - Page 87
    Web screen configurations (continued) Camera title Input the camera title here. The camera title which has • If user authentication fails more than 8 times within a 30-second period from the same IP address (computer), access to the unit will be disabled for a certain period. User auth. User
  • Panasonic AW-HE130 | Operating Instructions - Page 88
    Web screen configurations (continued) Password / Retype password Input the password. Maximum number of characters 4 to 32 half-size 168.0.254" will be able to access the camera at the "2. Camera control" access level. • When an already registered IP address is input and the Set button is clicked
  • Panasonic AW-HE130 | Operating Instructions - Page 89
    Web screen at the same time. Network setup screen Configure network settings in the Network setup screen. The Network setup screen consists of the two tabs Consult your network administrator or Internet service provider. • IP address • Subnet mask • Default gateway (when using a gateway
  • Panasonic AW-HE130 | Operating Instructions - Page 90
    configure an unused IP address for the camera as a fixed IP address. The IP address configured will be automatically determined by the camera from within the the operating instructions for the router. Default gateway When [Manual] is set to [On] for [IPv6 network], enter the default gateway for the
  • Panasonic AW-HE130 | Operating Instructions - Page 91
    the network settings from the Easy IP Setup Software. Setting value: 20min The setting operations from the Easy IP Setup Software are enabled for 20 minutes after the camera has started operating. Unlimited The setting operations from the Easy IP Setup Software are enabled at all times. Factory
  • Panasonic AW-HE130 | Operating Instructions - Page 92
    Web screen configurations (continued) Recommended network setting for internet Perform the recommended settings to connect the camera to the network setting screen. NTP server address When "Manual" is selected in the "NTP server address setting", input the IP address or host name of the NTP
  • Panasonic AW-HE130 | Operating Instructions - Page 93
    not supported. • To confirm that automatic port forwarding is correctly set, click the "Status" tab in the Maintenance screen to confirm that the "UPnP" status is set to "Enable". (→page@@) If "Enable"is not displayed, refer to "Cannot access the Internet from the Camera" in the "What's the Trouble
  • Panasonic AW-HE130 | Operating Instructions - Page 94
    Web : A warning screen is displayed when accessing the camera by HTTPS for the first time. Install the self personal computer in accordance with the screen instructions. (→page @@) • When using a System name Input the name of the system to control the unit with the SNMP function. Maximum number of
  • Panasonic AW-HE130 | Operating Instructions - Page 95
    Web screen configurations (continued) Contact Input the email address or telephone number of the administrator. Maximum number of characters 0 to 255 half-size characters Invalid characters
  • Panasonic AW-HE130 | Operating Instructions - Page 96
    Web screen configurations (continued) „„Setting HTTPS This encrypts access to the camera and sets HTTPS to improve communication safety. Setting HTTPS is page @@) 5. Setting the Connection Method (→ page @@) Accessing the Camera by HTTPS • When using a server certificate, the process
  • Panasonic AW-HE130 | Operating Instructions - Page 97
    Web screen be displayed. • Perform procedures 1 to 3 to change (update) the generated CRT key. Because the CRT key, self-signed certificate (half-size characters), and the following half-size symbols When connecting the camera to the Internet, set the address or host name to be accessed from
  • Panasonic AW-HE130 | Operating Instructions - Page 98
    perform the following settings in advance in the web browser Internet options. Perform the following settings in number of characters Common Name Inputs the camera address or host name. 64 half certificate can no longer be used when generating/updating the CRT key after applying to the Certificate
  • Panasonic AW-HE130 | Operating Instructions - Page 99
    the unit is restarted. Update the server certificate before with the screen instructions. (→ page Camera by HTTPS 1. Launch the web browser in your personal computer. 2. Input the camera's IP address in the address bar of the web "On", the user name and password input screen is displayed before the
  • Panasonic AW-HE130 | Operating Instructions - Page 100
    is displayed. When the authentication screen is displayed, input the user name and password. • When the above screen is displayed after accessing a device apart from the camera or a website, there may be a security problem, so check this carefully. 3. Click "Certificate error" in the URL and
  • Panasonic AW-HE130 | Operating Instructions - Page 101
    Web screen configurations (continued) 8. consists of four tabs: "System log", "Product info.", "Status", "Default reset" and "Back up". „„System log screen A maximum of a of the unit's software can be checked on this screen. The "Model no.", "MAC address", "Serial no.", "Firmware version" and other
  • Panasonic AW-HE130 | Operating Instructions - Page 102
    the dealer's instructions. • Use the following files specified by Panasonic Corporation as the software used for version upgrading. CPU Software Interface .sif files CPU Software Camera Main .scm files CPU Software Servo .spt files CPU Software Network .snw files EEPROM Interface .eep files
  • Panasonic AW-HE130 | Operating Instructions - Page 103
    settings are returned to their defaults. The login user name and password will also return to their defaults (admin/12345). When the be returned to defaults. - Format - Frequency - DHCP - IP address - Subnet mask - Default gateway - DNS - HTTP port number - Line speed - Bandwidth control (bit rate)
  • Panasonic AW-HE130 | Operating Instructions - Page 104
    Web screen configurations (continued) „„Back up screen On this screen, the unit's settings settings to save when saving the unit's configuration data on the computer. Setting value: Camera Camera settings Network Network settings Download Save the unit's settings onto the computer. When the
  • Panasonic AW-HE130 | Operating Instructions - Page 105
    on compatible operating systems and web browsers, visit the support desk at the following website. http://pro-av.panasonic.net/ • Use a standard password. The default settings for the user name and password are as follows. User name admin Password 12345 In order to ensure security, the password
  • Panasonic AW-HE130 | Operating Instructions - Page 106
    ] (→ page @@) is set to [HTTPS] in the [Advanced] tab of the Network screen, enter the following. https:///mobile • When the authentication dialog box appears, enter the user name and password of an administrator or general user. Depending on the mobile terminal model
  • Panasonic AW-HE130 | Operating Instructions - Page 107
    Displaying the web screen using a mobile terminal (continued) Iris Focus When this button is pressed, the buttons for performing the iris operations are displayed on the screen. This switches the iris between auto and manual. At the auto setting, the button label is green. This adjusts the iris
  • Panasonic AW-HE130 | Operating Instructions - Page 108
    camera's tally lamp is monitored at regular intervals while the camera is connected, and the lamp's display is updated. While the tally lamp is on, the IP password of an administrator or general user. Depending on the mobile terminal, password like this, first close the web browser which is running on
  • Panasonic AW-HE130 | Operating Instructions - Page 109
    the server may be incorrect. Check the server's IP address settings again. • The NTP server may be down. Consult your server administrator. • A problem has occurred in the NTP function. Check the NTP settings again. • The time has been updated successfully. Description of error • Generation of the
  • Panasonic AW-HE130 | Operating Instructions - Page 110
    , obstacles that may come into contact with the remote camera may exist its movement range. In such cases, setting control and controller or web setting screen. Whatever was set or released last takes precedence. For the controller operations, refer to the Operating Instructions of the controller
  • Panasonic AW-HE130 | Operating Instructions - Page 111
    for 2 seconds, the camera menu will appear. If this happens, press the [MENU] button again for 2 seconds to clear the camera menu. Then start again of the movement range Press the [4] or [5] button of the wireless remote control to turn the unit as far as the position which will serve as the
  • Panasonic AW-HE130 | Operating Instructions - Page 112
    , some or all of the operations will no longer be acknowledged to ensure safety and prevent equipment damage. Detection of equipment trouble When the unit has detected trouble, its functions are shut down, then the unit is restarted or the initial setting operation is performed, and the normal
  • Panasonic AW-HE130 | Operating Instructions - Page 113
    software if necessary. For details on installation, refer to the supplied operating instructions. • The contents of this section are based on the results of operation confirmation tests performed by Panasonic. The symptoms may vary depending on your computer's environment, the OS update version
  • Panasonic AW-HE130 | Operating Instructions - Page 114
    and host authorization must be set to OFF when the AWRP120, AW‑RP50 and AK-HRP200 remote camera controllers are connected in a network. • It may be necessary to upgrade the version of the controller so that the controller will support the unit. → Consult with your dealer. The unit turns in the
  • Panasonic AW-HE130 | Operating Instructions - Page 115
    address which has been set in the camera] A reply returned from the unit signifies that there are no problems in operation. If a reply is not received, try following operation: • Reboot the unit, and within 20 minutes change the IP address using the Easy IP Setup Software. • Has 554 been set as the
  • Panasonic AW-HE130 | Operating Instructions - Page 116
    Troubleshooting (continued) Symptom It is not possible to download the setting files Cause and solution For Windows: • Has the file download function been disabled? → Perform the
  • Panasonic AW-HE130 | Operating Instructions - Page 117
    Troubleshooting of any trouble. • The resolution of the characters in the camera menu displays white parts of the camera menus. No auto focusing • Is the focus set to manual? → Auto focusing is to VIDEO OUT mode? → Set the monitoring mode to IP mode. 1080/29.97PsF images appear jerky • This is
  • Panasonic AW-HE130 | Operating Instructions - Page 118
    Troubleshooting (continued) Symptom Cause and solution The pictures are too light or too dark • Either select the auto setting for the iris or select the manual setting and adjust the iris manually the camera, it may appear slightly distorted. This is normal and not indicative of any problem.
  • Panasonic AW-HE130 | Operating Instructions - Page 119
    Troubleshooting (continued) „„IP images Symptom Cause and solution For Windows: • Is the plug-in viewer software installed. → Install the plug-in viewer software the focus adjustment. Images are not updated • The images may not be updated and other problems may occur depending on your browser
  • Panasonic AW-HE130 | Operating Instructions - Page 120
    may be distorted if video packet shuffling occurs on the transmission path. → Switching to an identical Internet service provider for both the camera and the computer may prevent this problem. → Consult your network administrator. The images darken when the mobile terminal is not operated for
  • Panasonic AW-HE130 | Operating Instructions - Page 121
    Troubleshooting (continued) „„Web settings Depending on the OS installed on the personal computer, the following may occur. Follow the instructions then click the [Security] tab. Click "Internet" in the "Select a Web content zone to specify its security settings:" section. Then, click the [Custom
  • Panasonic AW-HE130 | Operating Instructions - Page 122
    Dimensions (W x H x D): 1 80 mm × 228 mm × 234 mm (excluding protrusions, cable cover, direct ceiling mount bracket) Finish: A W‑HE120W: Pearl white AW‑HE120K: Metallic black Controller supported: AW-RP120, AW‑RP50, AK-HRP200 • It may be necessary to upgrade the version of
  • Panasonic AW-HE130 | Operating Instructions - Page 123
    the unit must be secured using the mount bracket supplied. Camera/pan-tilt head control: IP connecting cable RP connecting cable • When category 5 or above, straight cable), max. 1000 m [3280 ft] RS-422A, AW series protocol *2 Use of an STP (shielded twisted pair) cable is recommended. Pan/
  • Panasonic AW-HE130 | Operating Instructions - Page 124
    Index 124
  • Panasonic AW-HE130 | Operating Instructions - Page 125
    MEMO 125
  • Panasonic AW-HE130 | Operating Instructions - Page 126
    the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Web Site: http://panasonic.net © Panasonic Corporation 2014
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
VQT5L27
XX1014KT0 -PS
ENGLISH
Model No.
AW-HE130W
Model No.
AW-HE130K
Operating Instruction
HD Integrated Camera
Before operating this product, please read the instructions carefully and save this manual for future use.
z
About the instruction manuals
•
Operating Instructions (this document):
This manual describes how to operate and configure settings for the unit.
•
Installation Instructions:
This manual includes information on installation and system configurations for the unit.
Be sure to read this before installing the unit to ensure proper installation.