Panasonic AW-HE130 Operating Instructions - Page 30
Manual shooting, Manually adjusting the focus, Manually adjusting the shutter speed - ptz
![]() |
View all Panasonic AW-HE130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Manual shooting Manually adjusting the focus The lens focus can be adjusted manually. When performing operations from a wireless remote control 1. Press the button to switch the focus to manual adjustment. 2. Press the or button of to adjust the focus. When the button is pressed, the focus moves further away (far); conversely, when the button is pressed, it moves nearer (near). The speed of focusing and other adjustments can be switched to fast or slow by pressing the or button, respectively. 3. If necessary, press the button to return the focus to the automatic adjustment. When performing operations from a controller When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. • When the focus is set to manual, the subject may go out of focus during panning, tilting and zooming. Therefore, the unit comes with a function which compensates for this. (Focus ADJ With PTZ.) This function was set to ON at the factory. If the function has been set to OFF, either adjust the focus, as required, after zooming or set the focus to auto. (→page 57, @@) Manually adjusting the iris The lens iris can be adjusted manually. When performing operations from a wireless remote control 1. Press the button to switch the iris to manual adjustment. 2. Adjust the iris using the or button. Press the button to adjust the lens iris in the opening direction; conversely, press the button to adjust the lens iris in the closing direction. The speed of the iris and other adjustments can be switched to fast or slow by pressing the or button, respectively. 3. If necessary, press the button to return the iris to the automatic adjustment. When performing operations from a controller When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. • In the night mode, the iris is set to open as a measure to prevent video spying. Adjust the brightness at the light source. Manually adjusting the shutter speed The shutter speed can be set using two methods. One is a method that specifies the time (where a time such as 1/250 sec. is designated), and the other is a method that specifies the frequency (where synchro scan, 60.15 Hz, etc. is designated). When shooting a TV screen or PC monitor screen, the horizontal noise generated when the screen is shot can be minimized by adjusting the frequency to the screen frequency using synchro scan. When performing operations from a wireless remote control Perform the adjustments on the Camera menu. For further details, refer to the [Shutter Mode] (→ page 48) and [Step/ Synchro] (→ page 48). When performing operations from a controller The procedure is the same as for "When performing the operations using the wireless remote control" in "Basic operations" (→pages 37 to 46). When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. Manually adjusting the gain There are two ways to adjust the gain. One way involves using the buttons on the wireless remote control or controller; the other way involves using the Camera menu or Web setting. The gain can be adjusted more precisely using the Camera menu or Web setting. For further details, refer to the [Gain] (→page 49, @@). • When adjusting the gain, the light quantity may change suddenly (causing the image output to be subjected to a shock). When performing operations from a wireless remote control 1. Press one of the buttons (, or ) . These buttons enable the gain increase to be selected in three steps. [LOW] is used to select 9 dB; [HI] is used to select 18 dB. 2. If necessary, press the [AUTO] button of in order to return the gain to the automatic adjustment (AGC). When performing operations from a controller When using a AW-RP50, AW-RP120, or AK-HRP200 Refer to the operating instructions for the controller. In any case, the maximum gain of the automatic adjustment (AGC) can be set by the camera menu or Web setting. For further details, refer to the [AGC Max Gain] (→page 49, @@). 30
![](/manual_guide/products/panasonic-awhe130-operating-instructions-4f3ed63/30.png)