Panasonic AW-HE130 Operating Instructions - Page 40
Operations on the AW‑RP50 Remote Camera Controller, Camera menu operation - ptz camera
![]() |
View all Panasonic AW-HE130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Basic operations (continued) Operations on the AW‑RP50 Remote Camera Controller POWER ALARM F1 F2 F1 CAMERA OSD MENU STORE PAGE DELETE 1 2 3 4 5 GAIN/PED R/B GAIN R/B PED AWB/ABB SHUTTER 6 7 8 9 10 DETAIL SCENE/MODE CAMERA SETUP PRESET MEMORY / MENU SYSTEM F2 EXIT USER1 USER2 IRIS AUTO TELE ZOOM WIDE 1 AUTO 2 3 4 5 CAMERA STATUS / SELECTION FOCUS/PUSH OAF LOW HI PTZ/FOCUS SPEED PT ACTIVE For operating the camera menus. CAMERA OSD: When this is pressed for 2 seconds, the selected camera menu is displayed, overlapping the camera output image. When it is pressed for 2 seconds while a camera menu is displayed, the menu is exited. F1: Turn to move the cursor up and down in the camera menu or to change setting values. Press to move to the next level of a menu item or to change a setting value at the lowest level. Selects a camera to be operated. Camera menu operation 1. Press the appropriate button to select the unit you want to operate. 2. Press and hold the button on the AWRP50 for about 2 seconds. The AW‑HE130 camera menu appears on the monitor. 3. Turn the dial to select an AW‑HE130 camera menu item or to change a setting value. Turn the dial to move the cursor up and down or to change setting values. Press the dial to move to the next level of a menu item or to change a setting value at the lowest level. 4. To exit the camera menu, press and hold the for about 2 seconds. Switching between day and night mode 1. Press the button on the AW-RP50. The button lights, and the buttons become selectable. 2. Press the button in the area. The button lights, and the [SETUP] menu appears on the LCD panel. 3. Turn the dial to select [FUNCTION], then press the dial. 4. Turn the dial to select [OPTION]. [Off] or [On] appears on the bottom right (F2 area) of the LCD panel. 5. Turn the dial to select [Off] or [On], then press the dial. [Off]: Day mode [On]: Night mode Color temperature setting (COLOR TEMP) 1. Press the button on the AW-RP50. The button lights, and the buttons become selectable. 2. Press the button in the area. The button lights, and the [AWB/ABB] menu appears on the LCD panel. 3. Turn the dial to select [VAR]. Color temperature configuration is enabled when [VAR] is selected, and it is initially set to the color temperature held on the camera. To adjust the setting, proceed to the following. 4. Press the button in the area. The button lights, and the [GROUP] menu appears on the LCD panel. 5. Turn the dial to select [COLOR TEMP], then press the dial. The color temperature appears on the bottom right (F2 area) of the LCD panel. 6. Turn the dial to select the color temperature, then press the dial. 40
![](/manual_guide/products/panasonic-awhe130-operating-instructions-4f3ed63/40.png)