Panasonic AW-HE130 Operating Instructions - Page 60

Camera menu items (continued) IP Network screen IP Network IP Address 192.168. 0. 10 Subnet Mask 255.255.255. 0 Default Gateway 192.168. 0. 1 Menu settings initialized screen Menu settings initialized Return IP Address This is selected to display the IP address which has been set for the unit. Subnet Mask This is selected to display the subnet mask which has been set for the unit. Default Gateway This is selected to display the default gateway which has been set for the unit. • On this screen, the [IP Address], [Subnet Mask] and [Default Gateway] settings can be displayed but they cannot be changed. To change an address, use "Network" (→page @@) on the Web setting screen or "Easy IP Setup Software" (→page @@). Return Return to the previous menu level. • When the cursor is moved to [CANCEL] on the Initialize screen and the setting is entered, the [Menu settings unchanged] screen is displayed for 5 seconds, the initialization operation is not performed, and the [Maintenance] screen returns to the display. Menu settings unchanged screen Menu settings unchanged „„Concerning initialization When [Initialize] is selected on the [Maintenance] screen, the [Initialize] screen appears. Initialize screen Initialize Do you want to initialize Menu settings? CANCEL O.K. • When the cursor is moved to [O.K.] on the [Initialize] screen and the setting is entered, the [Menu settings initialized] screen is displayed for 5 seconds, and the camera settings are restored to the settings which were established when the camera was purchased. However, the [Format] settings and [Frequency] settings (→ page 55) and network settings are not initialized. • Operation returns to the Top Menu screen when the initialization operation is completed. At this point, set the unit to the STANDBY mode, and then set it to the POWER ON mode again. (See page 25) • The [Format] and [Frequency] settings are not initialized. • The [AWB] and [ABB] adjustment values are not initialized. 60