Panasonic AW-HE130 Operating Instructions - Page 37
Basic operations, Wireless remote control and controller operations
View all Panasonic AW-HE130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Basic operations Camera menus are displayed on the monitor when the unit's settings are to be selected. The monitor is connected to the video signal output connector. The basic camera menu operations involve displaying sub‑menus from the Top Menu items, and selecting settings on the sub‑menus. Some sub‑menus have menu items for performing more detailed settings. The camera menu operations are conducted using the wireless remote control. If a controller is connected, they can also be conducted using the controller. • Check that your controller is the following version. If the version is older, consult your local dealer. AW-RP50: Ver 3.00.00 or later AW-RP120: Ver 2.00.00 or later AK-HRP200: Ver 4.00-00-0.00 or later Only the steps taken using the wireless remote control will be described here for the operations conducted to select and set the items. For details of the operations conducted using the controller, substitute "controller" for "wireless remote control" when reading the basic operations. Refer to the operating instructions for the controller. Described below are the basic operations for changing the camera menu item settings using the wireless remote control and controller (AW‑RP50, AW‑RP120 or AW‑HRP200). Wireless remote control and controller operations Camera menu operation Wireless remote control AW‑RP50 Controller AW-RP120 AK-HRP200 Selecting a camera to operate Press the , , , or button. Press the or button. Press the or button. 1. P ress and hold the (camera selection) button for about 2 seconds. → T he camera number in the camera number display area blinks. 2. P ress the lit buttons ( and ). → Press the lit buttons ( and ) to select the camera number. 3. Press the (camera selection) button. → C ontrol of the selected camera is enabled. Displaying the Top Menu Press and hold the button for about 2 seconds. Press and hold the button for about 2 seconds. Press and hold the button for about 2 seconds. Press and hold the button for about 2 seconds. Selecting items Press the , , , or button. Turn the dial. Turn the dial. Turn the dial. Displaying sub-menus Press the button. Press the dial. Turn the dial. Press the dial. Returning to the previous Place the cursor on [Return], Place the cursor on [Return], menu and press the button. and press the dial. Place the cursor on [Return], and press the dial. Place the cursor on [Return], and press the dial. Changing settings Place the cursor on the item you want to change, button to make the setting value blink. Change the value using the , , , or button, and press the button to confirm. 1. Press the dial to make the setting value blink. 2. Turn the dial to change the setting value. 3. Press the dial to confirm the setting value (blinking stops). 1. P ress the dial to make the setting value blink. 2. T urn the dial to change the setting value. 3. P ress the dial to confirm the setting value (blinking stops). 1. Press the dial to make the setting value blink. 2. T urn the dial to change the setting value. 3. P ress the dial to confirm the setting value (blinking stops). Canceling setting changes Tap the MENU button (hold for less than 2 seconds) while the setting value is blinking. ― ― ― Exiting camera menu operations Press and hold the button for about 2 seconds. Press and hold the button for about 2 seconds. Press and hold the button for about 2 seconds. Press and hold the button for about 2 seconds. • Perform the menu operations and exit from the menus using the controller which displayed the Top Menu. If a menu operation has been performed or a menu has been exited using another controller, first display the Top Menu and exit from it using one controller, and then display the Top Menu and exit from it using the other controller. • The procedures used for this unit's menu operations may differ from the ones used for the convertible cameras and HD integrated cameras which have already been released on the market. For details, refer to the Operating Instructions of the camera concerned. • The response speed of the camera differs slightly depending on the controller used. 37