Panasonic AW-HE130 Operating Instructions - Page 57

Camera menu items (continued) Other 1/4 screen Others 1/4 Install Position Desktop Smart Picture Flip Off Flip Detect Angle ---- Preset Speed Table Fast Preset Speed 20 Preset Scope Mode A Freeze During Preset Off Speed With Zoom POS. On Return Install Position [Desktop, Hanging] "Desktop" or "Hanging" is selected here as the method used to install the unit. Desktop: Stand-alone installation Hanging: Suspended installation • When [Hanging] has been selected, the top, bottom, left and right of the images will be reversed, and up/down/left/right control for panning and tilting will also be reversed. Smart Picture Flip [Off, Auto] When the tilt becomes the angle set for [Flip Detect Angle], the image will be flipped in the vertical direction automatically. Off: The picture is not turned upside down (flipped). Auto:The picture is automatically turned upside down (flipped). Flip Detect Angle [60° to 120° ] Set the tilt angle at which the image will be flipped in the vertical direction automatically when [Smart Picture Flip] is set to [Auto]. Preset Speed Table [Slow, Fast] Set the preset speed table (Slow, Fast). During preset playback, presets are performed at [Preset Speed] (1 to 30) values that are based on the table set here. • When [Preset Speed Table] is set to [Fast], [Preset Speed] values equivalent to the AW-HE120 will be applied. Preset Speed [1 to 30] Set the pan/tilt movement speed used when recalling camera orientation information registered to the preset memory (30 steps). • When you set large [Preset Speed] values, the image may sway when the movement stops. Preset Scope [Mode A, Mode B, Mode C] Selected here are the setting items to be recalled when the contents of the preset memory are regenerated. Mode A: Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain, white balance adjustment value Mode B: Pan, Tilt, Zoom (including digital zoom), Focus, Iris Mode C: Pan, Tilt, Zoom (including digital zoom), Focus Freeze During Preset [Off, On] Turn the function for freezing images during preset playback off/on. When this is set to [On], preset playback is performed with a still of the image immediately preceding the start of preset playback being output. The image freeze is released when preset playback is finished. Speed With Zoom POS. [Off, On] "Off" or "On" is set here for the function used to adjust the pan-tilt adjustment speed in conjunction with the zoom magnification. When [On] is set, the panning and tilting operations will become slower in the zoom status. This function has no effect during preset operations. Return Return to the previous menu level. Other 2/4 screen Others 2/4 Focus Mode Auto Focus ADJ With PTZ. ---- Digital Zoom Disable Max Digital Zoom ---- Digital Extender Off OIS Off Tally Enable Tally Brightness Low Return Focus Mode [Auto, Manual] Select auto or manual mode for the focus adjustment function. Auto:Always adjust focus automatically. Manual: Adjust focus manually. Focus ADJ With PTZ. [Off, On] "Off" or "On" is set here for the function which compensates for out-offocusing when it occurs during panning, tilting or zooming operations. When [Off] is set, adjust the focus as required after zooming or set the focus to the auto mode. This item can be selected only when [Manual] has been selected as the [Focus Mode] setting. Digital Zoom [Disable, Enable] "Enable" or "Disable" is set here for the digital zoom function. If zooming is performed toward the Tele end beyond the maximum position when [Enable] has been selected, the digital zoom can be operated continuously. Zooming will stop temporarily at the position where the optical zoom and digital zoom are switched so after it has stopped at this position, proceed with zooming again. When the setting is changed to [Disable] while already in the digital zoom region, the zoom will automatically move to the maximum position of the optical zoom. • The digital zoom is set to OFF when color bars are displayed during digital zooming. Max Digital Zoom [x2, x3, x4, x5, x6, x7, x8, x9, x10] Set the maximum digital zoom magnification. Digital Extender [Off, On] Turn the digital extender function off/on. When this is set to [On], the digital zoom will be fixed at 1.4x. When [Digital Zoom] is set to [Enable], [Digital Extender] is disabled. OIS [Off, On] Turn the optical image stabilization function off/on. • The OIS function's level of correction is reduced during pan/tilt operations. Tally [Disable, Enable] "Enable" or "Disable" is set here for the function which turns on or turns off the tally lamp using the tally control signal. Tally Brightness [Low, Mid, High] Adjust the brightness of the tally LED. • When this is set to [Low], the brightness is equivalent to that of the AW-HE120. Return Return to the previous menu level. 57