Panasonic AW-HE130 Operating Instructions - Page 92
Advanced network setting screen, Recommended network setting for internet, NTP server address setting
 |
View all Panasonic AW-HE130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Web screen configurations (continued) Recommended network setting for internet Perform the recommended settings to connect the camera to the Internet. Clicking the "Set" button displays a dialog box telling the user that item settings will be changed. After confirming this, click the "OK" button. • Camera image's "JPEG/H.264" tab JPEG(1) Image capture size: 640×360 JPEG(2) Image capture size: 320×180 JPEG(3) Image capture size: 160×90 H.264(1) • H.264(2) • H.264(3) • H.264(4) Internet mode (over HTTP): On Transmission priority: Best effort H.264(1) Image capture size: 1280×720 Max bit rate (per client): Max1024 kbps, Min256 kbps H.264(2) Image capture size: 640×360 Max bit rate (per client): Max1024 kbps, Min128 kbps H.264(3) Image capture size: 320×180 Max bit rate (per client): Max1024 kbps, Min128 kbps H.264(4) Image capture size: 160×90 Max bit rate (per client): Max1024 kbps, Min128 kbps • "Network" tab in the Network setting screen Common IPv6/v4 Max RTP packet size: Limited (1280 byte) HTTP max segment size(MSS): Limited (1280 byte) „„Advanced network setting screen Click the "Advanced" tab in the network setting screen (→page@@, page @@) Settings relating to the NTP, UPnP, HTTPS, SNMP, and Diffserv functions are performed here. Click the links to each item to move to the respective setting page. zzNTP Settings relating to the NTP server address and port No. are performed here. NTP server address setting Select the method to acquire the NTP server address. Setting value: Auto Acquires the NTP server address from the DHCP server. Manual Sets the address by inputting the NTP server address in "NTP server address". Factory settings: Manual • To acquire the NTP server address from the DHCP server, "Network Settings" (→page @@) must be set to either "DHCP", "Auto(AutoIP)" or "Auto(Advanced)" in the "Network" tab of the network setting screen. NTP server address When "Manual" is selected in the "NTP server address setting", input the IP address or host name of the NTP server. Maximum number of characters 1 to 128 half-size characters Characters that can be entered Half-size alphanumeric characters, half-size symbols Factory settings: blank • To input the "NTP server address" host name, the DNS setting must be selected on the Network screen of the Network settings. (→page @@) NTP port [1 to 65535] Input the port No. of the NTP server. Port Nos. that can be selected 1 to 65535 The following port numbers are used by the unit so they cannot be used. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443, 995, 10669, 10670 Factory settings: 123 92
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87 -
88 -
89 -
90 -
91 -
92 -
93 -
94 -
95 -
96 -
97 -
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
 |
 |
