Panasonic AW-HE130 Operating Instructions - Page 88
Host auth. screen, Web screen configurations continued, Password / Retype password, Off]
![]() |
View all Panasonic AW-HE130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Web screen configurations (continued) Password / Retype password Input the password. Maximum number of characters 4 to 32 half-size characters Invalid " & characters Factory settings: blank • If you enter a new name for a registered user and click the Set button, the user information will be overwritten. Access level Select one of the following settings as the user access level. Setting value: 1. Administrator This access level allows the user to perform all the unit's operations. 2. Camera control This access level allows only Live screen operations to be performed. The unit cannot be set. 3. Live only This access level enables only Live screen to be displayed. The unit cannot be operated or set. Factory settings: 3. Live only User check You can view registered users by clicking [▼] for [User check]. A registered user is indicated in the form of "Registered user name [Access level]". (Example: admin[1]) You can delete selected users by clicking the [Delete] button at the right. Host auth. screen Click the Host auth. tab of User mng. screen. (→page@@, page @@) Configure the host authorization settings that restrict the computers (IP addresses) that can access the unit. Host auth. [On, Off] Host authorization is set to "On" or "Off" here. Setting value: On Perform host authentication. Off Do not perform host authentication. Factory settings: Off IP address The IP address of the personal computer from which access to the camera is allowed is input here. The host name cannot be input as the IP address. • When the "IP address/subnet mask length" is input, the personal computers which are allowed to access the camera can be restricted on a subnet by subnet basis. If, for instance, "192.168.0.1/24" has been input and the "2. Camera control" setting has been selected as the access level setting, the personal computers from "192.168.0.1" to "192.168.0.254" will be able to access the camera at the "2. Camera control" access level. • When an already registered IP address is input and the Set button is clicked, the host information will be overwritten. Access level Select one of the following settings as the host access level. Setting value: 1. Administrator This access level allows the user to perform all the unit's operations. 2. Camera control This access level allows only Live screen operations to be performed. The unit cannot be set. 3. Live only This access level enables only Live screen to be displayed. The unit cannot be operated or set. Factory settings: 3. Live only Host check You can view registered host IP addresses by clicking [▼] for [Host check]. A host is indicated in the form of "Registered IP address [Access level]". (Example: 192.168.0.21 [1]) You can delete selected hosts (IP addresses) by clicking the [Delete] button at the right. 88
![](/manual_guide/products/panasonic-awhe130-operating-instructions-4f3ed63/88.png)