Panasonic AW-HE130 Operating Instructions - Page 58
Other 3/4 screen, Mic High, Mic Middle, Mic Low, Line High
View all Panasonic AW-HE130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Camera menu items (continued) Other 3/4 screen Others 3/4 Wireless Control Enable OSD Mix SDI Out On HDMI Out On Video Out On IP On OSD Off With Tally Off OSD Status Off Return Other 4/4 screen Others 4/4 Audio Off Input Volume Line Middle Plugin Powe Off Protocol Model Select SEVIHD1 Return Wireless Control [Disable, Enable] "Enable" or "Disable" is set here for operations conducted from the wireless remote control. The operations are enabled when the unit's power is turned on from an external device other than a wireless remote control, and they are disabled when the power is turned on from a wireless remote control. • At the point when this item's setting is changed, the new setting is not reflected in operation. It is reflected when the unit is set to the standby mode and its power is turned on. • Follow one of the procedures below if the item's setting is changed by mistake and the unit can no longer be operated from a wireless remote control. When menu operations can be performed using another control device: →First change the item using a control device capable of performing menu operations, and then turn off the unit's power and turn it back on. When menu operations cannot be performed using other control devices: 1. Turn off the power of the units and devices that are connected. 2. Disconnect the unit's power cable, and plug it back in. 3. Perform the operation for turning on the unit's power from the wireless remote control. 4. After changing this item, turn off the unit's power and turn it back on. OSD Mix Select whether to turn off/on camera menu, status, and other displays for each output image. SDI Out [Off, On] HDMI Out [Off, On] Video Out [Off, On] IP [Off, On] Off:The camera menus and statuses are not displayed on the output pictures targeted by the setting items listed above. On: The camera menus and statuses are displayed for the output pictures covered by the setting items listed above. • When this is set to [Off], the camera menu can be displayed for about 1 minute after the unit is turned on. OSD Off With Tally [Off, On] Enable or disable the function that turns off camera menu, status, and other displays when tally signals are received via commands or contacts. When the tally signal releases, the camera menu display will return. OSD Status [Off, On] Turn the status display during AWB and ABB on/off. Return Return to the previous menu level. Audio [Off, On] Turn audio input off/on. Input Volume [Mic High, Mic Middle, Mic Low, Line High, Line Middle, Line Low] Set the mic input, line input, and volume. Mic High: Use the mic input with the volume set to high. Mic Middle: Use the mic input with the volume set to medium. Mic Low: Use the mic input with the volume set to low. Line High: Use the line input with the volume set to high. Line Middle: Use the line input with the volume set to medium. Line Low: Use the line input with the volume set to low. Plugin Power [Off, On] Turn the plugin power for the audio off/on. This is only enabled when [Input Volume] is set to mic input. Protocol Model Select [SEVIHD1, SBRC300, SBRCZ330, Reserved1 to Reserved7] Set the protocol model for standard serial communication. Appears when the service switch (SW4) at the bottom of the unit is set to ON (standard serial communication). Do not select [Reserved1] to [Reserved7]. Return Return to the previous menu level. 58