Ricoh C232SF User Guide - Page 103
Placing Originals, Placing originals on the exposure glass, Lower the exposure glass cover or ADF.
UPC - 026649064432
View all Ricoh C232SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Placing Originals Placing Originals This section describes the procedure for placing originals on the exposure glass and in the ADF. Important ❒ Do not place originals before any correction fluid and toner has completely dried. Doing so may make marks on the exposure glass that will appear on 2 copies. ❒ The original in the ADF takes precedence over the original on the exposure glass if you place originals both in the ADF and on the exposure glass. Note ❒ Because colors made by marker or highlighter pen on originals are difficult to reproduce, they might not appear on copies, or might appear as different colors. Placing originals on the exposure glass The exposure glass enables you to scan and send documents that cannot be fed into the ADF. Important ❒ Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged. A Lift the exposure glass cover or ADF. Be careful not to hold the input tray when lifting the ADF, for the tray might be damaged. B Place the original face down on the exposure glass. The original should be aligned to the rear left corner. BAA050S C Lower the exposure glass cover or ADF. 93