Ricoh C232SF User Guide - Page 303
Pause/Redial, Paper Select, Paper, Bypass Tray, Paper Se, Message, Causes, Solutions
UPC - 026649064432
View all Ricoh C232SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
Error and Status Messages on the Screen Message Connection Fail C toner Independent-supply Cover Open Dial Fail Density Sensor Require Cleaning Dup. Copy Only Supports A4/B5/LG/LT/Executive Dup. Copy Only Supports Tray 1/Tray 2 Duplex Jam Duplex Misfeed Jam Causes Solutions The line could not be connect- • Confirm that the telephone ed correctly. line is properly connected to the machine. • Disconnect the telephone line from the machine, and connect a standard telephone in its place. Confirm that you can make calls using the telephone. If you cannot make calls this way, contact your telephone company. A non-supported print cartridge is installed. Remove and replace it with a print cartridge specified by an authorized dealer. A cover is open. Close the cover completely. The fax could not be sent. • Confirm that the fax number you dialed is correct. • Confirm that the destination is a fax machine. • Confirm that the line is not busy. • You may need to insert a pause between dial digits. Press the {Pause/Redial} key after, for example, the area code. The machine failed to adjust color registration. Clean the toner density sensor. See p.311 "Cleaning the Toner Density Sensor". 2-sided copy could not be per- • Specify the tray containing formed because the tray does the A4, B5, Letter, Legal, or not contain the valid size pa- Executive size paper (oth- per, which are A4, B5, Letter, er than the bypass tray) in Legal, or Executive. the [Paper Select] setting. See p.200 "Copy Settings". • Specify the A4, B5, Letter, Legal, or Executive size for the tray selected for printing copies in the [Paper Size] setting. See p.217 "Machine Settings". 2-sided copy could not be per- Specify a setting other than formed because paper is set to [Bypass Tray] for the [Paper Sebe fed from the bypass tray. lect] setting. See p.200 "Copy Settings" . Paper has been jammed in the Remove the jammed paper. duplex unit. See p.272 "Removing Printing Jams". 9 293