Ricoh C232SF User Guide - Page 243
TEL Line Type, PBX Selection, PBX Access Digit, Default Mode, Auto Clear, Default
UPC - 026649064432
View all Ricoh C232SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
Administrator Settings ❖ TEL Line Type Specifies the line type of the telephone line. To configure this setting, contact your telephone company and select the setting based on your telephone line. Selecting a wrong setting may cause failures in fax transmissions. Default: [Tone] • Tone • Pulse 10PPS • Pulse 20PPS ❖ PBX Selection Sets the machine to connect to the public switched telephone network (PSTN) or a private branch exchange (PBX). Default: [PSTN] • PSTN • PBX ❖ PBX Access Digit Specifies the dial number to access the outside line when the machine is con- nected to a PBX. Make sure that this setting matches the setting of your PBX. Otherwise, you may not be able to send faxes to outside destinations. Default: 9 • 000 to 999, in increments of 1 7 ❖ Default Mode Specifies the mode that is activated when the power is turned on, or if the time specified for [Auto Clear] elapses without activity while the initial screen of the current mode is displayed. Default: [Copy] • Copy • Fax ❖ Auto Clear Sets the machine to return to the initial screen of the current mode if the machine receives no input for a specified period of time during configuration. Also, if the specified period elapses while the initial screen of the current mode is displayed, the machine returns to the mode specified in [Default Mode]. Default: [On] (30 seconds) • On (30 sec, 1 min, 2 min, 3 min, 5 min, 10 min) • Off 233