Ricoh C232SF User Guide - Page 244

Configuring the Machine Using the Control Panel ❖ Power Saver Sets the machine to enter Energy Saver mode, Energy Saver mode 1 or Energy Saver mode 2, to reduce power consumption. The machine recovers from Energy Saver mode when it receives a pint job, prints a received fax, or when the {Copy}, {Color Start}, or {B&W Start} key is pressed. • EnergySaverMode1 The machine enters Energy Saver mode 1 if the machine has been idle for about 30 seconds. It takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2. Default: [Off] • Off • On (30 seconds) • EnergySaverMode2 The machine enters Energy Saver mode 2 after the period of time specified for this setting is passed. The machine consumes less power in Energy Saver mode 2 than in Energy Saver mode 1, but it takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1. Default: [On] (10 minutes) • On (1 to 240 minutes, in 1 minute increments) • Off 7 ❖ Display Language Specifies the language used on the screen and in reports. Default: [English] ❖ Country Code Selects the country in which the machine is used. The country code you specify determines the time and date display format and the default values of the fax transmission-related settings. Make sure to select the country code correctly. Selecting a wrong country code may cause failures in fax transmissions. Default: [USA] ❖ Setting Default • Clear Menu Settings • Not Execute Exits to the previous level of the menu tree without clearing the settings. • Execute Resets the machine's settings to their defaults except the following: language for the screen, country setting, network settings, and fax Quick Dial/Speed Dial destinations. 234