Ricoh C232SF User Guide - Page 161
Specifying resolution, Density, Auto Clear, Image Quality, Clear/Stop, Resolution
UPC - 026649064432
View all Ricoh C232SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Scanning Using the Control Panel • When the power is turned off. • When the machine's default for the same setting is changed. Reference For details about [Density], see p.206 "Scanner Settings". For details about [Auto Clear], see p.231 "Administrator Settings". Specifying resolution This section describes how to specify the scan resolution for the current job. There are six resolution settings. The higher the resolution, the higher the quality but greater the file size. A Press the {Image Quality} key. 5 BPC023S B Press the {Image Quality} key or {U}{T} keys to select the desired resolution, and then press the {OK} key. Note ❒ Press the { } key or {Clear/Stop} key to discard the current change and return to the initial screen. ❒ You can change the machine's default [Resolution] setting to always scan with a specific resolution level. ❒ Temporary job settings are cleared in the following cases: • When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed. • When the {Clear/Stop} key is pressed while the initial screen is displayed. • When the machine's mode is changed. • When the power is turned off. • When the machine's default for the same setting is changed. Reference For details about [Resolution], see p.206 "Scanner Settings". For details about [Auto Clear], see p.231 "Administrator Settings". 151