Ricoh C232SF User Guide - Page 39

Installing the Machine • White area: Permissible Range • Gray area: Recommended Range Note ❒ To avoid build up of ozone, be sure to locate this machine in a large, well ventilated room that has an air turnover of more than 30 m3/hr/person. ❒ When you use this machine for a long time in a confined space without good ventilation, you may detect an odd smell. To keep the workplace comfortable, we recommend that you keep it well ventilated. 2 ❖ Environments to Avoid Important ❒ Areas exposed to direct sunlight or strong light ❒ Dusty areas ❒ Areas with corrosive gases ❒ Areas that are excessively cold, hot, or humid ❒ Areas directly exposed to currents of hot, cold, or room-temperature air from air conditioners ❒ Areas directly exposed to radiant heat from heaters ❒ Locations near air conditioners, heaters, or humidifiers ❒ Locations near other electronic equipment ❒ Locations subject to frequent strong vibration ❖ Power Source Connect the power cord to a power source of the following specification: • : 120 V, 50/ 60 Hz, 11 A or more (when fully equipped) • : 220-240 V, 50/ 60 Hz, 6 A or more (when fully equipped) Unpacking To protect it from shock and vibration during transit, this machine comes packaged in cushioning foam and secured with tape. Remove these protective materials after bringing the machine to where it will be installed. R WARNING: • Do not incinerate used toner or toner containers. Toner dust might ig- nite when exposed to an open flame. Dispose of used toner containers in accordance with local regulations. • Do not store toner, used toner, or toner containers in a place with an open flame. The toner might ignite and cause burns of a fire. 29