Sharp VL-WD450U VLWD450U|VLWD650U Operation Manual - Page 67
White Balance Lock
View all Sharp VL-WD450U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
White Balance Lock The color of the subject on the screen tends to look different depending on the lighting condition. The camcorder is preset to Auto White Balance mode, which automatically adjusts the hue of the picture for the current lighting condition. Auto White Balance may not work properly for the following subjects. In this case, use the white balance lock function. • Subjects with one dominant color or subjects against background with one dominant color • Subjects under very bright light source, e.g. video lights • Subjects under light source with red hue, e.g. glow of sunset • Close-up images of small objects Note: • White Balance Lock cannot be set when the camcorder is in Easy mode or the SUPER CAT'S EYE switch is set to ON. W/B button 4 Press the MENU/DISPLAY button to set the white balance lock. • "W/B LOCK" flashes during the locking procedure. To cancel the locking procedure, press the MENU/DISPLAY button while "W/B LOCK" flashes. MAN U A L W B LOCK MAN U A L W B LOCK 5 Press the W/B button to turn off the white balance lock screen. • "W/B LOCK" is displayed. MAN U A L W B LOCK 12 bit Advanced Features 3 0min SP 1 Set the camcorder to TAPE-CAMERA or CARD-CAMERA mode. 2 Press the W/B button to display the white balance lock screen. AUTO WH I T E BAL . SE T MENU D I SP L AY 3 Aim the lens at a white object. • Adjust the distance of the object so that the entire screen is white. To cancel White Balance Lock 1 Press the W/B button, then press the MENU/DISPLAY button. • "W/B LOCK" changes to "WHITE BAL.". 2 Press the W/B button to turn off the white balance lock screen. Notes: • If the light source changes or if you move from indoors to outdoors, or vice versa, when recording with the white balance locked, the white balance may shift. Reset the white balance. • Do not move the camcorder while "W/B LOCK" is flashing in step 4. • If "W/B LOCK" does not stop flashing in step 4, press the MENU/DISPLAY button to cancel the locking procedure, and repeat step 4. • White Balance Lock will be canceled if a scene setting is selected thereafter. 52