Sony BRCH900 Product Manual (BRC-H900 Operating Manual) - Page 22

Overview RM-BR300 Remote Control Unit (not supplied) This manual explains the operations of the RM-BR300 Remote Control Unit when it is used with BRC-H900 cameras. Front 890qaqsqd qf 1 2 3 4 5 6 7 VALUE LOCK - + R BRIGHT MODE - + B FOCUS AUTO AUTO MANUAL NEAR FAR ONE PUSH AF RESET PRESET SHIFT L/R DIRECTION POWER PANEL LIGHT BLACK PAN-TILT ONE PUSH LIGHT RESET AWB MENU POSITION 12345678 9 10 11 12 13 14 15 16 STD REV CAMERA 1234567 qhqjqk ql w; qg A LOCK button and indicator Press the LOCK button for more than one second, the LOCK indicator lights and the values set by the VALUE/R, BRIGHT/B and FOCUS controls are locked. (The indicators of the locked controls are turned off.) The AUTO/MANUAL button is also disabled. Press the LOCK button for more than one second again to unlock the controls and buttons. B VALUE/R control When the brightness adjustment mode is selected with the MODE button (with the VALUE indicator lit): Adjusts the value of the item (SHUTTER, IRIS or GAIN) selected through the menu of the camera. When the VALUE indicator is lit, the function of the control varies according to the MODE setting in the EXPOSURE menu of the camera. For details, see "Functions of the VALUE and BRIGHT controls" on page 53. When the white balance adjustment mode is selected with the MODE button (with the R indicator lit): The function of the control with the R indicator lit varies according to the white balance mode selected on the camera. For details, see "Functions of the R and B controls" on page 52. C BRIGHT/B control When the brightness adjustment mode is selected with the MODE button (with the BRIGHT indicator lit): Adjusts the brightness settings of the camera, etc. When the BRIGHT indicator is lit, the function of the control varies according to the MODE setting in the EXPOSURE menu of the camera. For details, see "Functions of the VALUE and BRIGHT controls" on page 53. When the white balance adjustment mode is selected with the MODE button (with the B indicator lit): The function of the control with the B indicator lit varies according to the white balance mode selected on the camera. For details, see "Functions of the R and B controls" on page 52. D MODE button Press this button to select the function of the VALUE/R control and BRIGHT/B control. When the brightness adjustment mode is selected, the VALUE and BRIGHT indicators are lit. When the white balance adjustment mode is selected, the R and B indicators are lit. E FOCUS control Turn this control counterclockwise (toward NEAR) to focus on a near subject, and clockwise (toward FAR) to focus on a far subject. F AUTO/MANUAL button and AUTO indicator Press this button to select focus mode, AUTO or MANUAL. When AUTO is selected, the AUTO indicator lights and the FOCUS control and the ONE PUSH AF button are disabled. When MANUAL is selected, the FOCUS control and the ONE PUSH AF button are enabled (with the FOCUS indicator lit). G ONE PUSH AF button Press this button to perform the one-push auto focus function. H RESET button Hold down this button and press one of the POSITION buttons, and the memory of the camera corresponding to the pressed POSITION button is cleared to the factory-preset conditions. When multiple cameras are connected, hold down this button and press the POWER button to set the camera addresses automatically. Note Some memory contents may not be erased even if you use the RESET button. For details about item erased by the RESET button, see "Presetting Items" on page 78. 22 GB Location and Function of Parts