Sony BRCH900 Product Manual (BRC-H900 Operating Manual) - Page 54

Operation Using the RM-BR300 Remote Control Unit 4 While holding down the PRESET button (for POSITION 1 to 8) or the SHIFT and PRESET buttons (for POSITION 9 to 16), press any of the POSITION buttons in which you want to store the settings. While holding down (for POSITION 1 to 8) RESET PRESET SHIFT Press a POSITION button. 12345678 9 10 11 12 13 14 15 16 While holding down (for POSITION 9 to 16) The settings are stored in the memory of the camera. The pressed button flashes during storing. Flashing stops when storing is completed. To recall the stored settings Press any of the POSITION buttons in which you have stored the settings. For POSITION 9 to 16, hold down the SHIFT button and press any of the POSITION buttons. To cancel the preset memory While holding down the RESET button (for POSITION 1 to 8) or the SHIFT and RESET buttons (for POSITION 9 to 16), press the POSITION button from which you want to cancel the settings. While holding down (for POSITION 1 to 8) RESET Press a POSITION button. PRESET SHIFT 12345678 9 10 11 12 13 14 15 16 While holding down (for POSITION 9 to 16) The pressed button flashes during canceling of the settings. Flashing stops when the settings have been canceled. Notes • When the power is turned on, the camera starts with the settings stored in POSITION 1. • If you want to retain the previous pan and tilt positions when the power is turned off and turned on again, store those positions in POSITION 1. • When you are storing or canceling the settings in one POSITION, you cannot call up, store or cancel the settings in another POSITION. • Before you store camera settings such as camera position, zooming, focusing, etc., in the memory, install the camera suitably and fix the camera securely. If you change the installation of the camera after storing, differences may arise on the preset. • For details about the setting items that you can store/ erase, see "Presetting Items" on page 78. Setting the Speed of the Camera Movement to a Preset Position You can select the panning/tilting speed when the camera moves to a preset position. 1 Press the CAMERA button to select the camera whose speed you want to set. 2 Press the POSITION button for which you want to set the speed for more than one second. All the CAMERA buttons, 1 to 7, flash. 3 Press one of the CAMERA buttons to select the speed. CAMERA button 1 2 3 4 5 6 7 Panning/tilting speed 1 degree/sec. 2.2 degrees/sec. 4.8 degrees/sec. 11 degrees/sec. 23.3 degrees/sec. 43 degrees/sec. 60 degrees/sec. (default) Now the camera will move to the position preset to the pressed POSITION button with the selected speed. To set the camera's movement speed to a preset position between 9 and 16 Hold down the SHIFT button and press the corresponding POSITION button for more than one second. The POSITION 1 to 8 buttons can be used for positions 9 to 16. 54 GB Storing the Camera Settings in Memory - Presetting Feature