Sony BRCH900 Product Manual (BRC-H900 Operating Manual) - Page 79

Presetting item DOWN UP RAMP CURVE IR RECEIVE IMG FLIP2) PAN REVERSE TILT REVERSE DISPLAY INFO SYNC MASTER HPHASE HPHASE FINE STEADY SHOT COLOR BAR TALLY MODE FORMAT (HD OUTPUT) ADD SYNC SYNC TYPE IMG SIZE (SD OUTPUT) SETUP3) (SD OUTPUT) Presetting position number 1 2 - 16 f - f - f - f - f - f - f - f - f - f - f - f - -1) f - f - f - f - f - f - 1)The item is set to OFF automatically when the power is turned off and on again even if the item is set to ON while you preset. 2)The current setting of IMG FLIP is recalled regardless of presetting operations. 3)The item cannot be stored for 1080/50i or 720/50p output signal. Presetting menu items while the Interface Card is inserted into BRU-SF10 connected with the camera Presetting item Presetting position number 1 2 - 16 Menu items displayed only when the HFBK-SA1 is installed DSUB OUTPUT 1 f - ADD SYNC f - DSUB OUTPUT 2 IMG SIZE1) f - f - SETUP (not available for 50i f - output signal) Menu items displayed only when the HFBK-HSD2 is installed IMG SIZE1) f - 1)When installed in the BRC-H900 and in use, the IMG SIZE setting is linked with the VIDEO OUT setting. When two BRBK-SA1 cards are installed in the BRUSF10, or when a BRBK-SA1 and BRBK-HSD2 are used as SD-SDI, the IMG SIZE settings for both option cards are linked. When two BRBK-HSD2 cards are installed in the BRU-SF10, or when a BRBK-SA1 and BRBK-HSD2 are used as SD-SDI, the IMG SIZE settings for both option cards are linked. z : Setting items are stored in memory. When the power is turned on, the camera starts with these settings. a : Setting items are stored in memory. Recall the settings by selecting the preset number. s : Setting items are stored in memory. Because only one memory is available for this item, the last preset setting is stored regardless of the preset number, and recalled when the power is turned on. This setting cannot be reset. When the item setting is changed, the new setting is applied, even if the preset is recalled. f : Setting items are stored in memory. When the power is turned on, the camera starts with these settings. This setting cannot be reset by pressing the RESET button. When the item setting is changed, the new setting is applied, even if the preset is recalled. - : Setting items are not stored. Appendix 79 Presetting Items GB