Sony BRCH900 Product Manual (BRC-H900 Operating Manual) - Page 80
Specifications, System, Input/output connectors, General
View all Sony BRCH900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Specifications System Video signal 1080/59.94i, 1080/50i, 720/59.94p, 720/50p (switched with the BOTTOM switch) Synchronization Internal/external synchronization, automatically switched Image device 1/2 type (8.0 mm), 3CMOS pickup element Total picture elements: Approx. 3,010,000 pixels Effective picture elements: Approx. 2,070,000 pixels Lens 14× (optical) Filter diameter: 77 mm (Wide/tele conversion lens cannot be attached.) f = 5.8 to 81.2 mm, F1.9 to F16 f = 31.4 to 439 mm (equivalent to the focal length of a 35-mm camera) Minimum object distance 800 mm (31 1/2 inches) Minimum illumination 4 lux (F1.9) with 50 IRE (WIDE end) Shutter speed 1/60 (1/50 for 1080/50i or 720/50p format) to 1/8,000 sec. Video S/N 50 dB (Typical) (component Y signal output) Pan/tilt action Horizontal: ±170 degrees Maximum panning speed: 60 degrees/sec. Minimum panning speed: 0.22 degrees/sec. Vertical: +90 degrees, -30 degrees Maximum tilting speed: 60 degrees/ sec. Minimum tilting speed: 0.22 degrees/sec. Input/output connectors Video output RGB/COMPONENT (D-sub 15-pin) RGB: 0.7 Vp-p (no sync, at 75-ohm termination) 1 Vp-p (±0.3 V, tri-level sync, at 75-ohm termination) Component: Y: 1 Vp-p (±0.3 V, tri-level sync, at 75-ohm termination) Pb/Pr: ±350 mVp-p, 75-ohm terminated HD/VD Sync: 1 Vp-p, 75-ohm terminated Tri-level Sync: ±300 mVp-p, 75ohm terminated VIDEO (BNC type) Composite: 1 Vp-p (sync negative, at 75-ohm termination) S VIDEO (mini DIN 4-pin) S video output: Y: 1 Vp-p (sync negative, at 75-ohm termination) C: Same as chroma level of composite signal (at 75-ohm termination) SDI OUT (BNC type, HD/SD switchable) Conforms to SMPTE 292/259M External sync input EXT SYNC IN: BNC type Control input/output VISCA RS-232C IN: Mini DIN 8-pin type VISCA RS-232C OUT: Mini DIN 8pin type VISCA RS-422: 9-pin type Control signal format 9600 bps/38400 bps Data: 8 bit Stop bit: 1 Power connector JEITA type4 (DC IN 12V) General Input voltage 12 V DC (10.8 V to 13.2 V DC) Current consumption 2.4 A max. (at 12 V DC), 28.8 W without optional Interface Card Operating temperature 0 ºC to 40 ºC (32 ºF to 104 ºF) Storage temperature -20 ºC to +60 ºC (-4 ºF to +140 ºF) Dimensions Video camera: 198 mm × 260 mm × 238 mm (7 7/8 in × 10 1/4 in × 9 3/8 in) (w/h/d) (excluding protruding parts) Mass Remote Commander: 56 mm × 26 mm × 8 32/180inm) m(w(/2h/1d/)4 in × 1 1/16 in × Video camera: Approx. 5.0 kg (11 lb 0.37 oz) Remote Commander: 110 g (3.9 oz) Installation angle Less than ±15 degrees to the horizontal surface Appendix 80 GB Specifications