Sony BRCH900 Product Manual (BRC-H900 Operating Manual) - Page 29

Adjusting and Setting With Menus Adjusting and Setting With Menus About On-Screen Menus You can change various settings, such as shooting conditions and system setup of the camera, while observing menus displayed on a connected monitor. This section explains how to read the on-screen menus before starting menu operations. For full details of menu configurations, see page 75. Note You cannot perform pan/tilt and zoom operations while the menu is displayed. Main Menu To display the main menu, press the DATA SCREEN button on the supplied Remote Commander or the MENU button on the RM-BR300 Remote Control Unit. OPT >EXPOSURE COLOR DETAIL COLOR DETAIL KNEE GAMMA FLICKER CANCEL FOCUS PAN TILT SYSTEM VIDEO OUT SD SD-SDI 1 Cursor Selects a setting menu. Move the cursor up or down by pressing the V or v button on the Remote Commander or by inclining the joystick of the RM-BR300 Remote Control Unit forward or backward. 2 Menu items To display a setting menu, select it using the V or v button on the Remote Commander or the joystick of the RM-BR300 Remote Control Unit, and press the HOME button on the Remote Commander or the top button of the joystick on the RM-BR300. 3 Option card indicator Displays the name of the interface card inserted into the card slot of the camera. Setting Menus The setting menu selected on the main menu is displayed. >IR RECEIVE IMG FLIP PAN REVERSE TILT REVERSE DISPLAY INFO SYNC MASTER HPHASE HPHASE FINE STEADY SHOT COLOR BAR TALLY MODE VERSION ON OFF OFF OFF ON HD 03 0 OFF OFF LOW 1.00 1 Setting menu The name of the menu currently selected is displayed here. 2 Cursor Selects a setting item. Move the cursor up or down by pressing the V or v button on the Remote Commander or inclining the joystick of the RM-BR300 Remote Control Unit forward or backward. 3 Setting items The setting items for this setting menu are displayed. To change a value, select the item using the V or v button on the Remote Commander or the joystick of the RM-BR300 Remote Control Unit, and press the B or b button on the Remote Commander or incline the joystick on the RM-BR300 right or left. 4 Set value The currently set values are displayed. To change a set value, use the B or b button on the Remote Commander or the joystick of the RMBR300 Remote Control Unit. For the default value of each setting item, see "Menu Configuration" on page 75. 29 About On-Screen Menus GB