Sony BRCH900 Product Manual (BRC-H900 Operating Manual) - Page 50

CAMERA button Maximum panning/tilting speed 6 43 degrees/sec. 7 60 degrees/sec. Only the CAMERA button you pressed flashes, and the corresponding maximum panning/tilting speed is set. Note The maximum panning/tilting speed setting is stored in the memory of the optional RM-BR300 Remote Control Unit. If you use another RM-BR300 Remote Control Unit or you connect another camera to the RM-BR300, set a limit on the maximum panning/tilting speed again. To face the camera back to the front Press the button on the top of the joystick for one or two seconds. Press for 1 or 2 seconds. If you accidentally move the camera with your hand Press the PAN-TILT RESET button to perform the pan/ tilt reset action. If the camera moves in a different direction from that you intended The camera is preset to face toward the right whenever the joystick is inclined to the right. You might wish to face the camera toward the opposite direction from that in which you inclined the joystick, for example, when you change the direction of the camera while checking the picture on the screen. In such a case, press the POSITION 2 (REV) button while holding down the L/R DIRECTION button. To reset the setting, press the POSITION 1 (STD) button while holding down the L/R DIRECTION button. Joystick Movement of the camera Setting Incline to the right. While holding down L/R DIRECTION 1 9 STD Press. Incline to the right. While holding down L/R DIRECTION 2 10 REV Press. Note The setting above only changes the signal emitted from the RM-BR300 Remote Control Unit, and does not change the setting of the camera itself. If the STANDBY lamp of the camera flashes When the camera is moved or turned by hand or by external shock, the microcomputer inside the camera may not be able to memorize the pan/tilt position properly. To reset the pan/tilt position, press the PAN-TILT RESET button. STANDBY flashes. Operation Using the RM-BR300 Remote Control Unit 50 GB Pan/Tilt and Zoom Operation