Sony BRCH900 Product Manual (BRC-H900 Operating Manual) - Page 89

Using the VISCA RS-422 Connector Plug 1 Insert a wire (AWG Nos. 28 to 18) into the desired wire opening on the VISCA RS-422 connector plug, and tighten the screw for that wire using a flathead screwdriver. To remove the connector plug Grasp both ends of the VISCA RS-422 connector plug and pull it out as shown in the illustration. 123456789 Flat-head screwdriver Wire 2 Insert the VISCA RS-422 connector plug into the VISCA RS-422 connector. 123456789 Notes • In order to stabilize the voltage level of the signal, connect both ends to GND. • When the connections using the VISCA RS-422 connectors are made, the VISCA RS-232C connection is not available. • The maximum connection distance with the VISCA RS-422 connection is approximately 1,200 m (3,937 feet). Appendix 89 Specifications GB