Sony BRCH900 Product Manual (BRC-H900 Operating Manual) - Page 23

Overview I PRESET button Hold down this button and press one of the POSITION buttons, and the current camera settings are stored in the memory of the camera corresponding to the pressed POSITION button. J PANEL LIGHT button Press this button to illuminate all the POSITION buttons and CAMERA buttons. Press the button again to turn off the illumination. K BACK LIGHT button When FULL AUTO, or BACK LIGHT is selected with MODE of the EXPOSURE menu, press this button to set the backlight compensation function of the camera to on/off. Each time you press this button, the backlight compensation function toggles between on and off. When FULL AUTO or SPOT LIGHT is selected with MODE of the EXPOSURE menu, hold down the SHIFT button and press this button to set the spotlight compensation function of the camera to on/off. Each time you press this button, the spotlight compensation function toggles between on and off. L PAN-TILT RESET button Press this button to reset the pan/tilt position of the camera to the initial conditions. M ONE PUSH AWB button When ONE PUSH is selected with the WHITE BALANCE menu of the camera, press this button to perform the one-push white balance adjustment. N MENU button Press this button for about one second to display or turn off the menu of the camera, or return to the main menu. O Joystick When the menu of the camera is not displayed The joystick is used for pan/tilt and zoom operations. When you incline the joystick right and left, the camera pans. When you incline it forward or backward, the camera tilts. The pan/tilt speed changes according to the angle of the inclination. When you release the joystick, the camera movement stops. When you turn the dial on the upper part of the joystick clockwise, the subject becomes larger (zoom in). When you turn it counterclockwise, the subject becomes smaller (zoom out). When you press the button on the top of the joystick for one or two seconds regardless of the PAN TILT ZOOM menu setting, the pan/tilt/zoom are reset and the camera returns to the front. When the menu of the camera is displayed The joystick is used for menu operations. Inclining the joystick right, left, forward and backward has the same function as pressing the arrow buttons of the supplied Remote Commander. Pressing the button on the top of the joystick has the same function as pressing the HOME button on the Remote Commander. P SHIFT button and indicators Hold down this button and press one of the POSITION buttons. The lower indicator lights and you can use the POSITION buttons for positions 9 to 16. If you release the SHIFT button, the upper indicator lights and the POSITION buttons can be used for positions 1 to 8. Q L/R DIRECTION button Hold down this button and press POSITION button 2 (REV) to reverse the pan direction to the direction in which you incline the joystick. To reset the direction, hold down this button and press POSITION button 1 (STD). R POWER button Press this button to light the CAMERA button(s) corresponding to the status of the connected camera(s). Blue: The power of the camera is on. Yellow green: The camera is in standby mode. Off: No camera is connected. Hold down this button and press CAMERA button 1 to 7 to turn on/off the power of the camera corresponding to the pressed button. S CAMERA buttons Press one of the buttons to select the camera from among those connected. The selected CAMERA button lights in blue. T POSITION buttons You can store the various camera settings such as the pan, tilt and zoom positions to the memory of the camera corresponding to each POSITION button, and load the settings in the memory. 23 Location and Function of Parts GB