Sony BRCH900 Product Manual (BRC-H900 Operating Manual) - Page 41
Video Out Menu, Hd-rgb/component, Format, Add Sync, Sync Type, Sd-video/s Video, Img Size, Setup
View all Sony BRCH900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Adjusting and Setting With Menus VIDEO OUT Menu HD-RGB/COMPONENT >FORMAT SYNC TYPE SD-VIDEO/S VIDEO IMG SIZE SETUP YPbPr SYNC 16:9[LETTER] OFF HD-RGB/COMPONENT FORMAT Select the signal output from the RGB/ COMPONENT connector on the camera. YPbPr: Outputs analog component signals. RGB: Outputs RGB signals. ADD SYNC Appears when RGB is selected with FORMAT and specifies whether to add a sync signal. RGB: Outputs each R, G and B signal with a sync signal added. OFF: Outputs each R, G and B signal with no sync signal added. SYNC TYPE Appears when either RGB or YPbPr is selected with FORMAT and specifies the type of a sync signal. SYNC: Outputs the tri-level sync. VD: Outputs the bi-level sync. SD-VIDEO/S VIDEO IMG SIZE Select the aspect ratio of the signal output from the VIDEO or S VIDEO connector on the camera. 16:9[LETTER]: The image is displayed in 16:9 letterbox. 4:3[CROP]: The image is displayed in 4:3 edge crop. 4:3[SQUEEZE]: The image is displayed in 4:3 squeeze. Note If the SDI output on the camera is set to SD, IMG SIZE of the SD-SDI output is also changed when IMG SIZE is changed. SETUP Select whether 7.5IRE setup is added to the signal output from the VIDEO or S VIDEO connector on the camera. ON: Outputs signals with 7.5IRE setup added. OFF: Outputs signals with no 7.5IRE setup added. Notes • The SETUP item does not appear when an HD signal of 1080/50i or 720/50p format is output. • 7.5IRE setup is not added to output signals from the SD-SD1 output. 41 VIDEO OUT Menu GB