Sony DSLR A700H User's Guide - Page 149
Troubleshooting, Battery pack and power, Shooting images
UPC - 027242736122
View all Sony DSLR A700H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Troubleshooting Troubleshooting If you experience trouble with your camera, try the following solutions. Check the items on pages 149 to 157. Consult your Sony dealer or local authorized Sony service facility. Battery pack and power The battery pack cannot be installed. • As you insert the battery pack, use the tip of the battery pack to push the lock lever (t step 1 in "Read This First"). Cannot turn on the camera. • Install the battery pack correctly (t step 1 in "Read This First"). • The battery pack is discharged. Install a charged battery pack (t step 1 in "Read This First"). • The battery pack is dead (page 163). Replace it with new one. The power turns off suddenly. • If you do not operate the camera for given period of time, the camera turns to power saving mode and nearly shuts down. To cancel the power save, operate the camera, such as pressing the shutter button halfway down (t step 4 in "Read This First"). • The battery pack is discharged (page 163). Install a charged battery pack (t step 1 in "Read This First"). The battery remaining indicator is incorrect, or sufficient battery remaining indicator is displayed but the power runs out too quickly. • This phenomenon occurs when you use the camera in an extremely hot or cold location (page 163). • The displayed battery remaining differs from the current one. Fully discharge and then charge the battery pack to correct the display. • The battery pack is dead (page 163). Replace it with new one. Shooting images Nothing is displayed on the LCD monitor when the power is turned on. • In the default setting, the LCD monitor will turn off if no operation is registered for more than five seconds to minimize the battery consumption. You can change the time setting (page 120). • The LCD monitor is set to off. Press the DISP (Display) button to turn the LCD monitor on (page 23). The image is not clear in the viewfinder. • Adjust the diopter scale properly using the diopter-adjustment dial (t step 5 in "Read This First"). 149 Troubleshooting