Sony DSLR A700H User's Guide - Page 151
button halfway down., Excessive light appears in the image.
UPC - 027242736122
View all Sony DSLR A700H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Troubleshooting A picture taken with the flash is too dark. • If the subject is beyond the flash range (the distance that the flash can reach), the pictures will be dark because the flash light does not reach the subject. If the ISO is changed, the flash range also changes with it (page 64). The bottom of a picture taken with the flash is too dark. • The picture was taken with the lens hood on. Remove the lens hood when the built-in flash is used. With some lenses, the bottom of the picture may become dark even without the lens hood (t step 5 in "Read This First"). The flash takes too long to recharge. • The flash has been fired in succession in a short period. When the flash has been fired in succession, the recharging process may take longer than usual to avoid overheating of the camera. The date and time are recorded incorrectly. • Set the correct date and time (page 122, t step 4 in "Read This First"). The aperture value and/or shutter speed flash when you press the shutter button halfway down. • Since the subject is too bright or too dark, it is beyond the available range. Adjust the setting again. Excessive light appears in the image. • The picture was taken under a strong light source, and excessive light has entered the lens. Attach a lens hood. The corners of the picture are too dark. • If any filter or hood is used, take it off and try shooting again. Depending on the thickness of the filter and improper attachment of the hood, the filter or the hood may partially appear in the image. The optical properties of some lenses may cause the periphery of the image to appear too dark (insufficient light). The eyes of the subject come out red. • Activate the red eye reduction function (page 110). • Get close to the subject, and shoot the subject within the flash range using the flash (page 65). Dots appear and remain on the screen. • This is not a malfunction. These dots are not recorded (page 8). 151