Sony DSLR A700H User's Guide - Page 150
The flash does not work., The image has not been recorded.
UPC - 027242736122
View all Sony DSLR A700H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
The image has not been recorded. • A memory card is not inserted. The shutter does not release. • Check the free capacity of the memory card (page 24). If it is full, do one of the following: - Delete unnecessary images (t step 6 in "Read This First"). - Change the memory card. • You cannot record images while charging the built-in flash (t step 5 in "Read This First"). • The shutter cannot be released when the subject is out of focus. (The shutter lock can be deactivated (page 102).) • The shutter cannot be released when the camera is attached to another device, such as an astronomical telescope, etc. (The shutter lock can be deactivated in this situation (page 109).) • The shutter cannot be released with "----" flashing at the lower-right corner on the LCD monitor and "0" flashing in the viewfinder. This indication means a memory card is not inserted in the camera or an incorrect type of memory card is selected. Select your memory card type with [Memory card] in the Setup menu, then insert your memory card into the camera (t step 3 in "Read This First", page 123). • The shutter cannot be released with "--" lit at the upper-right corner on the LCD monitor. This indication means the lens is not attached properly. Attach the lens properly (t step 2 in "Read This First"). Recording takes a long time. • The noise reduction function is activated (page 103). This is not a malfunction. • You are shooting in RAW mode (page 96). Since the RAW data file is large, the RAW mode shooting may take time. The image is out of focus. • The subject is too close. Check the minimum focal distance of the lens. • You are shooting in manual focus mode, set to auto focus mode with the focus mode lever (page 52). • You try to shoot a subject that may require special focusing (page 50). Use the focus-lock or manual focus function (pages 51, 53). The flash does not work. • The built-in flash is closed. Pull it up. • The flash mode is set to [Autoflash]. If you want to make sure the flash fires without fail, set the flash mode to [Fill-flash] (page 73). Fuzzy specks appear in images shot using the flash. • Dust in the air reflected the flash light and appeared in the image. This is not a malfunction. 150