Toshiba 3200 Owners Manual - Page 35
Toshiba 3200 Manual
![]() |
View all Toshiba 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
PART 4 SETTING-UP (2) PRT/FDD Connector : is a 25-pin D-Shell connector to attach a Parallel Printer for hard-copy printouts of information. This connector can also be used to connect a 5.25-inch external FDD instead of a printer. Setting the A-B-PRT Switch to PRT and DIP Switch 2 to ON makes this port general I/O port. By this, the port can connect an I/O device having the same pin configuration and capabilities as the printer. (3) DIP Switch : allows you to select various configuration options. These switches are called out individually when features they affect are discussed. Section 4.7 Setting DIP Switch provides a summary. (4) A--B-PRT Switch : changes over the addresses (-A or -B) of the floppy disk drives. Refer to Section 4.6 A-B-PRT Switch Setting for details. (5) CRT Connector : is a 9-pin D-Shell female connector to connect an RGB direct drive colour CRT display. The colour display from an IBM PC can be used. (6) AC IN Change Switch : is provided to adapt the power supply to the commercial ac power voltage. Adaptable voltage is 115 or 230 volts. Normally this switch is blanked off and access by a user is not allowed. (7) AC IN Jack : Supplies ac power to the computer. The power cord connects here. 4-5
![](/manual_guide/products/toshiba-t3200-owners-manual-bc54034/35.png)