ZyXEL NWA-3163 User Guide - Page 102

Chapter 6 AP Controller Mode 6.6 Redundancy Screen Use this screen to set the controller AP as a primary or secondary controller. If you set your NWA as a primary controller AP, you can have a secondary controller AP to serve as a backup. All configurations are synchronized between the NWA and the secondary controller AP. When the NWA is in AP controller mode, click CONTROLLER > Redundancy. The following screen displays. Figure 66 Redundancy Screen The following table describes the labels in this screen. Table 15 Redundancy Screen LABEL DESCRIPTION Redundancy Select Enable to set the NWA either as a Primary AP Controller or as a Secondary Controller AP. Primary AP Controller Secondary IP Secondary AP Controller Apply Reset Select Disable when the NWA acts as a primary AP controller without a backup. Select this if the NWA has a secondary controller AP. You must give the IP address of this backup in the field below. Enter the IP address of the secondary controller AP. Select this if the NWA is the secondary controller AP. Click this to save the changes in this screen. Click this to return the fields in this screen to their previously-saved values. 102 NWA-3160 Series User's Guide