ZyXEL NWA-3163 User Guide - Page 352
Wcfg Command Configuration File Examples
View all ZyXEL NWA-3163 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 352 highlights
Appendix D Text File Based Auto Configuration The AP ignores any improperly formatted commands and continues to check the next line. If there are any errors while processing the configuration file, the AP generates a message with the line number and reason for the first error (subsequent errors during the processing of an individual configuration file are not recorded). You can use SNMP management software to display the message by using the following MIB. Table 108 Displaying the Auto Configuration Status ITEM OBJECT ID DESCRIPTION pwAutoCfgMessage 1.3.6.1.4.1.890.1.9.1. Auto configuration status message string 9 The commands will be executed line by line just like if you entered them in a console or Telnet CI session. Be careful to ensure the integrity of the whole AP configuration. If there are existing settings in the AP, the newly loaded configuration file will either coexist with the previous settings or replace them. You can zip each configuration file. You must use the store compression method and a .zip file extension. When zipping a configuration file, you can also add password protection using the same password that you use to log into the AP. Wcfg Command Configuration File Examples These example configuration files use the wcfg command to configure security and SSID profiles. Figure 214 WEP Configuration File Example !#ZYXEL PROWLAN !#VERSION 11 wcfg security 1 name Test-wep wcfg security 1 security wep wcfg security 1 wep keysize 64 ascii wcfg security 1 wep key1 abcde wcfg security 1 wep key2 bcdef wcfg security 1 wep key3 cdefg wcfg security 1 wep key4 defgh wcfg security 1 wep keyindex 1 wcfg security save wcfg ssid 1 name ssid-wep wcfg ssid 1 security Test-wep wcfg ssid 1 l2iolation disable wcfg ssid 1 macfilter disable wcfg ssid save 352 NWA-3160 Series User's Guide