ZyXEL NWA-3163 User Guide - Page 99

Chapter 6 AP Controller Mode Table 12 AP Lists Screen LABEL DESCRIPTION Status This displays whether the managed AP is active, not active or upgrading its firmware. • Red: the AP is not active. • Green: the AP is active. • Yellow: the AP is upgrading its firmware. Edit Delete Un-Managed Access Points List Index Select IP MAC Address Model Description Add Automatic Refresh Interval Refresh Note: You can still edit a managed AP's settings even if it is offline. However, the changes only take effect when the NWA detects that the managed AP is online again. Select the managed AP from the list and click this to edit the managed AP's settings. Select the managed AP from the list and click this to delete the managed AP from the list. When you do this, the managed AP is no longer handled by the NWA until you add it back to the list. This section lists the CAPWAP-enabled access points in the area that are in managed AP mode but which are not currently controlled by the NWA. This is the index number of an unmanaged AP that is requesting to be managed by the NWA. Click the topmost box either to select or deselect all NWAs in the list. Click an NWA's checkbox to select it and apply a corresponding action. You can also click several items at the same time and do the following: Click Add to include the unmanaged AP in the NWA's managed AP list. This displays the IP address of the unmanaged AP. This displays the MAC address of the unmanaged AP. This displays the model name and 802.11 mode of the unmanaged AP. This displays the description of the unmanaged AP. Select the unmanaged AP from the list and click this to include the unmanaged AP in the NWA's managed AP list. Enter how often you want the NWA to update this screen. Click this to update this screen immediately. NWA-3160 Series User's Guide 99