ZyXEL NWA-3163 User Guide - Page 358
Logging in, Command Conventions
View all ZyXEL NWA-3163 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
Appendix E How to Access and Use the CLI 2 Open a Telnet session to the NWA's IP address. If this is your first login, use the default values. Table 110 Default Management IP Address SETTING DEFAULT VALUE IP Address 192.168.1.2 Subnet Mask 255.255.255.0 Make sure your computer IP address is in the same subnet, unless you are accessing the NWA through one or more routers. In the latter case, make sure remote management of the NWA is allowed via Telnet. SSH You can use this method if your NWA supports SSH connections. 1 Connect your computer to one of the Ethernet ports. Use a SSH client program to access the NWA. If this is your first login, use the default values in Table 110 on page 358 and Table 111 on page 358. Make sure your computer IP address is in the same subnet, unless you are accessing the NWA through one or more routers. Logging in Use the administrator username and password. If this is your first login, use the default values. in some NWA models you may not need to enter the user name. Table 111 Default User Name and Password SETTING DEFAULT VALUE User Name admin Password 1234 The NWA automatically logs you out of the management interface after five minutes of inactivity. If this happens, simply log back in again. Use the sys stdio set command to extend the idle timeout. For example, the NWA automatically logs you out of the management interface after 60 minutes of inactivity after you use the sys stdio set 60 command. Use the sys stdio show command to display the current idle timeout setting. Command Conventions Command descriptions follow these conventions: 358 NWA-3160 Series User's Guide